Professionelle HW Oberfräser

5 Piece set of straights with centre tips

Five piece cutter pack aimed at kitchen fitters.

• Cutters have TC centre tip.

Durchmesser 2,0 - 12,7 mm

Dank HM-Bestückung für grobes Material wie Spanplatten, MDF, Sperrholz, Hartholz und Hartkunststoff geeignet. Sie erhalten durch die 2 Schneiden ein sauberes Ergebnis. Alle Fräser ab einem Durchmesser von 9,5 mm sind mit einer HM-bestückten Grundschneide ausgestattet.

Clearance Ground Two Flute

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.

• Two flutes give a clean finish to cut edges.
• All cutters above and including 9.5mm diameter, have TCT plunge centre tips.
• TC tips are ground with greater clearance for routing of resinous material.

Guided profiler

Profiler with shank mounted bearing guides.

• For use with router mounted above or below a table when following a template.
• For profiling and rebating applications only.
• Not for plunge cutting/grooving.
• A 3mm maximum overlap should be left before trimming.
• They are ideal for template making.
• Cutter has a smaller diameter for tighter corners and double bearing guides.

Four fluted with bearings fitted to nose and shank

Four fluted TCT trimmer/profiler.

• Super fine finish.
• Ball bearings fitted to both nose and shank.
• Allows templates to be placed either on top or the bottom of the material, for ease of routing.
• Allows for irregular grained timber to be profiled more easily, by turning component other way up.
• Light passes, maximum 2mm trimming.

For template work

Oversize profiler allows component to be routed oversize to template.

• Useful when making jigs, templates and patterns.
• Can be used for trenching operations in shallow passes.
• For use with the Porter Cable Strike & Latch and Door Hinge templates.
• Down shear.
• Equivalent to Porter Cable ref 43671.
• Can be used with Strike and Latch template ref 59375 or Door Hinge template ref 59370.

Bevel trim cutter

Gives a smooth bevel finish for laminates and other materials. Bearing follows the board beneath.

Linenfold

Two flute tungsten carbide tipped router cutter for linen fold effect on panels.

• Allows mock linen fold panels to be produced.
• Linen fold is a traditional effect used on furniture and panelling.
• For the scroll effect a shank mounted bearing guided 4mm radius cutter x 12.7mm diameter Ref 23/12X1/4TC should be used.
• Includes instruction leaflet and scroll template diagram.

Chamfer V Groove

Use for bevelling and chamfering.

• A flat, approximately 1.0mm, will be found on V Groove tip.
• Ref. 11/3 is ideal for imitating 'V' jointed tongue and groove on man-made board.

With shank mounted bearing

The water channel cutters produce radiused rebates and grooves. Suitable for plunge cutting.

• Ref. 23/12X1/4TC can be used with linenfold cutter ref. 18/96X1/2TC to give the scroll effect on ends of the linen fold panels.

Mini Round over Radius 2.4mm

Miniature bearing cutters ideal for sign-making, musical instrument building and other small intricate projects.

• Can be used on wood and plastic.
• Small bearing allows access to tight spaces and gives sharp corners.
• The unique design delivers a constant cutting edge that eliminates the need for hand sanding or filing.
• The tools have miniature bearings fitted which have a limited life of approximately 100 linear metres, after which these consumables will need to be replaced.

Mini Round over Radius 3.2mm

Miniature bearing cutters ideal for sign-making, musical instrument building and other small intricate projects.

• Can be used on wood and plastic.
• Small bearing allows access to tight spaces and gives sharp corners.
• The unique design delivers a constant cutting edge that eliminates the need for hand sanding or filing.
• The tools have miniature bearings fitted which have a limited life of approximately 100 linear metres, after which these consumables will need to be replaced.

Mini Round over Radius 4.0mm

Miniature bearing cutters ideal for sign-making, musical instrument building and other small intricate projects.

• Can be used on wood and plastic.
• Small bearing allows access to tight spaces and gives sharp corners.
• The unique design delivers a constant cutting edge that eliminates the need for hand sanding or filing.
• The tools have miniature bearings fitted which have a limited life of approximately 100 linear metres, after which these consumables will need to be replaced.

Miniature Bevel 7 degree

Miniature bearing cutters ideal for sign-making, musical instrument building and other small intricate projects.

• Can be used on wood and plastic.
• Small bearing allows access to tight spaces and gives sharp corners.
• The unique design delivers a constant cutting edge that eliminates the need for hand sanding or filing.
• The tools have miniature bearings fitted which have a limited life of approximately 100 linear metres, after which these consumables will need to be replaced.

Miniature Chamfer 45 degree

Miniature bearing cutters ideal for sign-making, musical instrument building and other small intricate projects.

• Can be used on wood and plastic.
• Small bearing allows access to tight spaces and gives sharp corners.
• The unique design delivers a constant cutting edge that eliminates the need for hand sanding or filing.
• The tools have miniature bearings fitted which have a limited life of approximately 100 linear metres, after which these consumables will need to be replaced.

Miniature Ogee Radius 2.4mm

Miniature bearing cutters ideal for sign-making, musical instrument building and other small intricate projects.

• Can be used on wood and plastic.
• Small bearing allows access to tight spaces and gives sharp corners.
• The unique design delivers a constant cutting edge that eliminates the need for hand sanding or filing.
• The tools have miniature bearings fitted which have a limited life of approximately 100 linear metres, after which these consumables will need to be replaced.

Miniature Rebater 3.1mm

Miniature bearing cutters ideal for sign-making, musical instrument building and other small intricate projects.

• Can be used on wood and plastic.
• Small bearing allows access to tight spaces and gives sharp corners.
• The unique design delivers a constant cutting edge that eliminates the need for hand sanding or filing.
• The tools have miniature bearings fitted which have a limited life of approximately 100 linear metres, after which these consumables will need to be replaced.

Miniature Trimmer 4.8mm

Miniature bearing cutters ideal for sign-making, musical instrument building and other small intricate projects.

• Can be used on wood and plastic.
• Small bearing allows access to tight spaces and gives sharp corners.
• The unique design delivers a constant cutting edge that eliminates the need for hand sanding or filing.
• The tools have miniature bearings fitted which have a limited life of approximately 100 linear metres, after which these consumables will need to be replaced.