Zubehör f. Oberfräsen

Guide Bush Metal

Guide bush guides the router when using a template.

• Fits directly to Trend T3,T4,T5,T5 MK2, T9,T10 and T11, and some other light duty routers.
• Will fit other makes when used with GB/5, GB/PLATE or UNIBASE Sub-base.

No volt release switch 230V euro

A versatile no volt release switch whose main function is the remote switching of power tools such as routers when mounted in a router table.

• The plug-in no volt release switch can be placed in a convenient position on the table.
• Trips power to the machine should the power be momentarily cut off.
• The switch must be bolted directly to router table leg or a user made workboard.
• Plug cable is 1.7 metre in length.

Hex key set

16 piece set of mini hex keys.

• Made from Chrome Vanadium steel for strength and durability.
• Metric sizes from 0.7mm to 3mm A/F.
• Imperial sizes from 0.028 inch to 9/64 inch A/F.
• Ideal for router cutters, modellers, engineers, automotive, DIY and electronics.

Carry case draining groove jig

Hard wearing carry case for the Drainer Groove or Belfast Sink jig.

• Will accept both jigs at same time.
• Adjustable shoulder strap and carry handle.
• Flap with velcro closer.
• Accessory pouch for sub bases.
• Can also be used for the STAIR/A and STAIR/B.

Digital depth gauge

Digital depth gauge for router tables and saw benches. Horizontal and vertical measuring.

• For hand routers, router tables and saw benches.
• LCD readout for mm, imperial and fractions with auto shut off 5 mins.
• Removable pin to allow hole depths to be measured. Pin can be parked on arm. Hole depth 50.8mm (2 inch).
• Self standing with magnetic feet and flat back.
• Injection plastic moulding with plastic rule.
• 60mm wide aperture.
• Read-out has relative co-ordinate and absolute function.
• Spare battery available ref. BAT/CR2032/3V.

Dowel centre point

Six pack of metal dowel centre points of diameter 6mm, 8mm & 10mm.

• Pair of 6mm, 8mm and 10mm diameter.
• Dowel centres fit into blind holes to allow lining up for the mating hole.
• Place end of dowel centre in the bored dowel hole in one piece of wood, place the second piece of wood in the required position and press. The dowel centre point will leave a centre for the second hole accurately marked.

Double Sided Tape

Heavy duty double sided sticky tape.

• Ideal where temporary fixing is required for example when jig making. Can be removed with your thumb.
• Rayon cloth coated with rubber resin adhesive for a strong hold.
• Siliconised paper release liner.
• Cut with a knife or scissors.
• 25mm width x 25 metres.

Ryobi ERT2100

Replacement collet.

• Does not include the collet nut.
• Suitable for the following:-
• Ryobi ERT2100

Combination router base

The Combination Router Base is a retro fit, quick change, multi-functional router base designed to:

• Increase the overall versatility of the router.
• Improve the quality of finish of every routing pass.
• Reduce the possibility of error.
• Increase stability during routing.
• Increase the level of precision achieved.
• Save set up time between tasks.
• Save space on storing hand made jigs.
• The CRB has seven functions - an offset baseplate, router compass from 19mm to 224mm radius, adjustable trenching with a clamp guide with 40mm micro adjustment, adjustable anti-tilt support, adjustable mortising of timber from 50mm to 200mm width, adjustable false panel groove copier and also enhances the Varijig frame system as an anti-tilt device when used with routers that can accept Euro style guide bushes (a special guide bush ref GB40/B is required).
• The CRB will fit most routers with two 8mm, 10mm and 12mm fence rod holes at centres of 78mm to 130mm.
• An accessory quick fit edge trimming base is available for trimming lipping up to 16mm wide and 6mm projection, ref. CRB/TB.
• Larger circles can be accommodated by using ccessory extension rods ref. N/COMPASS/AEX to increase radius by 560mm.
• Design Reg. No. 3003693.

Combination router base trim base

Quick fit trimming base for use with the CRB for trimming hardwood lipping.

• Plastic base plate.
• Can be used on lippings of 16mm wide and maximum 6mm (1/4 inch) projection above work surface.
• Includes a bearing guided copy follower.
• Maximum cutter diameter 25mm.
• CRB not included.