Professional HSS Cutters

Pin Guided Ovolo

These are made from a single piece of High Speed Steel, ground with a very fine edge.

• They are only suitable for non abrasive materials, but will give a superior finish in soft timbers.
• Generally HSS cutters are slightly less expensive than their TC grades, but can be more suitable for certain applications.
• Pin Guided Round Over guide pins follow intricate shapes easily.

Two Flute

These are made from a single piece of High Speed Steel, ground with a very fine edge. They are only suitable for non abrasive materials, but will give a superior finish in soft timbers. Generally HSS cutters are slightly less expensive than their TC grades, but can be more suitable for certain applications.

• Suitable for general grooving and rebating.

Single flute

These are made from a single piece of High Speed Steel, ground with a very fine edge. They are only suitable for non abrasive materials, but will give a superior finish in soft timbers. Generally HSS cutters are slightly less expensive than their TC grades, but can be more suitable for certain applications.

• For fast free cutting , these HSS cutters have extra clearance.

Single Flute Pocket

These are made from a single piece of High Speed Steel, ground with a very fine edge.

• They are only suitable for non abrasive materials, but will give a superior finish in soft timbers.
• Generally HSS cutters are slightly less expensive than their TC grades, but can be more suitable for certain applications.
• Single flute cutters with extra long shanks.

Pin Guided Round Over

These are made from a single piece of High Speed Steel, ground with a very fine edge.

• They are only suitable for non abrasive materials, but will give a superior finish in soft timbers.
• Generally HSS cutters are slightly less expensive than their TC grades, but can be more suitable for certain applications.
• Pin Guided Ovolos give a slight quirk.

Dovetail

These are made from a single piece of High Speed Steel, ground with a very fine edge.

• They are only suitable for non abrasive materials, but will give a superior finish in soft timbers.
• Generally HSS cutters are slightly less expensive than their TC grades, but can be more suitable for certain applications.
• To produce tight reliable joints. Ref. 31/02 is for use with DeWalt DE6251 dovetail jig.

For aluminium and plastics

Cutter are designed to plunge and machine or mill lateral slots.

• All aluminium tooling should be used with a coolant, wax stick or lubricant.
• Material should be securely clamped.
• Single flute helical for drilling and slotting, cutting aluminium anodised duralium and uPVC plastic.
• Ideal for recessing and slotting extrusions.
• HSSE is a special grade for machining the most abrasive anodised finishes.
• For grooving and profiling of aluminium and plastics.

Plunge Slotting

Cutter are designed to plunge and machine or mill lateral slots.

• All aluminium tooling should be used with a coolant, wax stick or lubricant.
• Material should be securely clamped.
• Single flute helical for drilling and slotting, cutting aluminium anodised duralium and uPVC plastic.
• Ideal for recessing and slotting extrusions.
• HSSE is a special grade for machining the most abrasive anodised finishes.