New Professional TCT Cutters

5 Piece set of straights with centre tips

Five piece cutter pack aimed at kitchen fitters.

• Cutters have TC centre tip.

Diameters from 2.0mm to 12.7mm

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.

• Two flutes give a clean finish to cut edges.
• All cutters above and including 9.5mm diameter, have TCT plunge centre tips.

Clearance Ground Two Flute

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.

• Two flutes give a clean finish to cut edges.
• All cutters above and including 9.5mm diameter, have TCT plunge centre tips.
• TC tips are ground with greater clearance for routing of resinous material.

Bearing mounted on end of cutter

For trimming and bevelling timber, lippings and plastic laminate edges or any shaping applications.

• Self-guiding trimmer with bearings mounted on end of cutter.
• For trimming plastic or plywood overlay.
• For copy profiling, use the bearing to follow a template or base edge of board.
• A 3mm approximate overlap should be left before copy profiling.
• When using plastic laminate always allow laminate adhesive to dry before trimming.
• This avoids clogging the guide bearing.

Guided profiler

Profiler with shank mounted bearing guides.

• For use with router mounted above or below a table when following a template.
• For profiling and rebating applications only.
• Not for plunge cutting/grooving.
• A 3mm maximum overlap should be left before trimming.
• They are ideal for template making.
• Cutter has a smaller diameter for tighter corners and double bearing guides.

For template work

Oversize profiler allows component to be routed oversize to template.

• Useful when making jigs, templates and patterns.
• Can be used for trenching operations in shallow passes.
• For use with the Porter Cable Strike & Latch and Door Hinge templates.
• Down shear.
• Equivalent to Porter Cable ref 43671.
• Can be used with Strike and Latch template ref 59375 or Door Hinge template ref 59370.

Linenfold

Two flute tungsten carbide tipped router cutter for linen fold effect on panels.

• Allows mock linen fold panels to be produced.
• Linen fold is a traditional effect used on furniture and panelling.
• For the scroll effect a shank mounted bearing guided 4mm radius cutter x 12.7mm diameter Ref 23/12X1/4TC should be used.
• Includes instruction leaflet and scroll template diagram.

Chamfer V Groove

Use for bevelling and chamfering.

• A flat, approximately 1.0mm, will be found on V Groove tip.
• Ref. 11/3 is ideal for imitating 'V' jointed tongue and groove on man-made board.

For dovetails joints and sliding dovetails.

For dovetail joints and sliding dovetails.

• Can be used with Ref.10/40 butterfly 14 degree spline cutter.

With shank mounted bearing

The water channel cutters produce radiused rebates and grooves. Suitable for plunge cutting.

• Ref. 23/12X1/4TC can be used with linenfold cutter ref. 18/96X1/2TC to give the scroll effect on ends of the linen fold panels.

Mini Round over Radius 2.4mm

Miniature bearing cutters ideal for sign-making, musical instrument building and other small intricate projects.

• Can be used on wood and plastic.
• Small bearing allows access to tight spaces and gives sharp corners.
• The unique design delivers a constant cutting edge that eliminates the need for hand sanding or filing.
• The tools have miniature bearings fitted which have a limited life of approximately 100 linear metres, after which these consumables will need to be replaced.

Mini Round over Radius 3.2mm

Miniature bearing cutters ideal for sign-making, musical instrument building and other small intricate projects.

• Can be used on wood and plastic.
• Small bearing allows access to tight spaces and gives sharp corners.
• The unique design delivers a constant cutting edge that eliminates the need for hand sanding or filing.
• The tools have miniature bearings fitted which have a limited life of approximately 100 linear metres, after which these consumables will need to be replaced.

Mini Round over Radius 4.0mm

Miniature bearing cutters ideal for sign-making, musical instrument building and other small intricate projects.

• Can be used on wood and plastic.
• Small bearing allows access to tight spaces and gives sharp corners.
• The unique design delivers a constant cutting edge that eliminates the need for hand sanding or filing.
• The tools have miniature bearings fitted which have a limited life of approximately 100 linear metres, after which these consumables will need to be replaced.

Miniature Bevel 7 degree

Miniature bearing cutters ideal for sign-making, musical instrument building and other small intricate projects.

• Can be used on wood and plastic.
• Small bearing allows access to tight spaces and gives sharp corners.
• The unique design delivers a constant cutting edge that eliminates the need for hand sanding or filing.
• The tools have miniature bearings fitted which have a limited life of approximately 100 linear metres, after which these consumables will need to be replaced.

Miniature Chamfer 45 degree

Miniature bearing cutters ideal for sign-making, musical instrument building and other small intricate projects.

• Can be used on wood and plastic.
• Small bearing allows access to tight spaces and gives sharp corners.
• The unique design delivers a constant cutting edge that eliminates the need for hand sanding or filing.
• The tools have miniature bearings fitted which have a limited life of approximately 100 linear metres, after which these consumables will need to be replaced.

Miniature Ogee Radius 2.4mm

Miniature bearing cutters ideal for sign-making, musical instrument building and other small intricate projects.

• Can be used on wood and plastic.
• Small bearing allows access to tight spaces and gives sharp corners.
• The unique design delivers a constant cutting edge that eliminates the need for hand sanding or filing.
• The tools have miniature bearings fitted which have a limited life of approximately 100 linear metres, after which these consumables will need to be replaced.

Miniature Rebater 3.1mm

Miniature bearing cutters ideal for sign-making, musical instrument building and other small intricate projects.

• Can be used on wood and plastic.
• Small bearing allows access to tight spaces and gives sharp corners.
• The unique design delivers a constant cutting edge that eliminates the need for hand sanding or filing.
• The tools have miniature bearings fitted which have a limited life of approximately 100 linear metres, after which these consumables will need to be replaced.

Miniature Trimmer 4.8mm

Miniature bearing cutters ideal for sign-making, musical instrument building and other small intricate projects.

• Can be used on wood and plastic.
• Small bearing allows access to tight spaces and gives sharp corners.
• The unique design delivers a constant cutting edge that eliminates the need for hand sanding or filing.
• The tools have miniature bearings fitted which have a limited life of approximately 100 linear metres, after which these consumables will need to be replaced.