Trend New CraftPro Router Cutters

Change your country or region:

Your country: UK

Items 0 | View order

Power Search

Enter product ref. or keyword


		New Products > New CraftPro Router Cutters

New CraftPro Router Cutters

Enlarge Image

Single Flute Straights

Single fluted Tungsten Carbide straight cutter for fast free cutting.

Single flutes should be chosen where speed and clearance rates are more important than the finish.
Depth of cut should not exceed cutter diameter.

Rollover or click each image to enlarge

Click each Product Ref. for full product information

Product Ref.	D mm	C mm	OL mm	Shank Dia.	Price
C034BX1/4TC	1.5	6	43	1/4	£ 16.20
C034CX1/4TC	3	11	50	1/4	£ 17.40

Enlarge Image

Two Flute Straight

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising.

Use on softwoods, hardwoods, MDF, plywood and chipboard.
All cutters have a bottom cut feature.

Rollover or click each image to enlarge

Click each Product Ref. for full product information

Product Ref.	D mm	D inch	C mm	C inch	OL mm	Shank Dia.	Price
C001EX1/4TC	2.5		8		48	1/4	£ 13.80
C005X1/2TC	6		16		61	1/4	£ 12.00
C012BX1/2TC	9		19	3/4	68	1/2	£ 14.40
C016CX1/4TC	10	25/64	25		57	1/4	£ 16.20
C016CX1/2TC	10	25/64	25		69	1/2	£ 16.20
C019X1/2TC	12	15/32	19.1	3/4	61	1/2	£ 16.80
C019BX1/2TC	12		25		68	1/2	£ 16.80
C171AX1/2TC	12	15/32	38	1 1/2	80	1/2	£ 19.20
C023CX1/2TC	14.0		50	2	95	1/2	£ 32.40
C024AX1/2TC	15.0	19/32	25	1	67	1/2	£ 16.80
C024BX1/2TC	15.0		35		76	1/2	£ 18.00
C024CX1/2TC	15.0		50	2	88	1/2	£ 32.40
C025CX1/2TC	15.9	5/8	32	1 1/4	74	1/2	£ 25.20
C025EX1/2TC	15.9	5/8	63	2 1/2	105	1/2	£ 38.40
C025AX1/2TC	16		19	3/4	60	1/2	£ 19.20
C028AX1/2TC	18	45/64	25	63/64	67	1/2	£ 20.40
C030BX1/2TC	19		50		92	1/2	£ 33.60
C030CX1/2TC	20		25		66	1/2	£ 21.60
C033BX1/2TC	25.4	1	50		68	1/2	£ 26.40
C033CX1/2TC	25.4	1	37		79	1/2	£ 39.60
C033EX1/2TC	26	1 1/32	25		65	1/2	£ 34.80
C033FX1/2TC	27	1 1/16	50		72	1/2	£ 36.00
C033GX1/2TC	28	1 7/64	25		66	1/2	£ 39.60
C033HX1/2TC	28.5	1 1/8	25		67	1/2	£ 39.60
C033KX1/2TC	31.8	1 1/4	25		67	1/2	£ 40.80
C033NX1/2TC	35	1 3/8	25		67	1/2	£ 43.20
C033PX1/2TC	38.1	1 1/2	25		66	1/2	£ 50.40
C033QX1/2TC	40	1 37/64	25		67	1/2	£ 52.80
C033RX1/2TC	41.3	1 5/8	25		67	1/2	£ 46.80
C033TX1/2TC	44.5	1 3/4	25		63	1/2	£ 54.00
C033WX1/2TC	50	1 31/32	25		63	1/2	£ 55.20
C033VX1/2TC	47.6	1 7/8	25		63	1/2	£ 54.00
C033YX1/2TC	50.8	2	25		66	1/2	£ 55.20

Enlarge Image

For grooves and trenches

Template thickness should be 5mm thicker than cut length of cutter.

Can be used to rout both tenons and housings.

Rollover or click each image to enlarge

Click each Product Ref. for full product information

Product Ref.

D
mm

D
inch

C
mm

B
mm

Shank
Dia.

Price

C226X1/4TC

19.1

3/4

11.1

19.1

1/4

£ 30.00

C226X1/2TC

19.1

3/4

11.1

19.1

1/2

£ 30.00

Enlarge Image

Hinge recess

Two flute TC cutter giving good chip clearance.

Ideal for shallow lateral routing cuts such as recessing hinges.
Corners will require final trimming square with a hand chisel or a corner chisel.

Rollover or click each image to enlarge

Click each Product Ref. for full product information

Product Ref.	D mm	D inch	C mm	OL mm	Shank Dia.	Price
C235X1/4TC	12.7	1/2	19	51	1/4	£ 18.00
C236X1/4TC	15.9	5/8	19	51	1/4	£ 18.60
C237X1/4TC	19.1	3/4	19	51	1/4	£ 19.80

Enlarge Image

Pocket Cutters

A two flute cutters with extra long shanks.

Deep grooving, rebating and mortising.
Useful for template work when thickness of template restricts depth.
Extra care must be taken to avoid breakage.
Take more passes than usual, and only cut up to half the diameter of the cutter in one pass.
This applies to cutters under 3/8 inch diameter.

Rollover or click each image to enlarge

Click each Product Ref. for full product information

Product Ref.

D
mm

D
inch

C
mm

OL
mm

Shank
Dia.

Price

C007LX1/4TC

6.3

1/4

£ 16.80

Enlarge Image

Self Guided Bevel Trimmers

This is bearing guided and gives a smooth bevel finish for laminates and other materials.

Bearing follows the board beneath.

Rollover or click each image to enlarge

Click each Product Ref. for full product information

Product Ref.

D
mm

C
mm

B
mm

A
degrees

Shank
Dia.

Price

C119AX1/4TC

12.7

1/4

£ 32.40

Enlarge Image

Self Guided Trimmers

Used for trimming plastic or plywood overlays.

Also for copy profiling with a template.

Rollover or click each image to enlarge

Click each Product Ref. for full product information

Product Ref.	D mm	D inch	C mm	C inch	B mm	A degrees	Shank Dia.	Price
C115AX1/4TC	9.5	3/8	25.4	1	9.5	90	1/4	£ 17.40
C116AX1/4TC	12.7	1/2	16	5/8	12.7	90	1/4	£ 16.20
C117AX1/4TC	19.1	3/4	25	1	15.9	90	1/4	£ 22.80
C117AX1/2TC	19.1	3/4	25	1	15.9	90	1/2	£ 22.80
C117BX1/2TC	19.1	3/4	50		15.9	90	1/2	£ 42.00

Enlarge Image

Strip recessers

Recessing cutter for producing double rebates.

For producing recesses with a lower rebate.
Designed to accept library/bookcase strip. Ref. C231 is specifically designed for Tonk Strip.

Rollover or click each image to enlarge

Click each Product Ref. for full product information

Product Ref.	D mm	D2 mm	C mm	Shank Dia.	Price
C231X1/4TC	9.5	19	13	1/4	£ 31.20
C231X1/2TC	9.5	19	13	1/2	£ 31.20
C230X1/4TC	13	19	10	1/4	£ 40.80

Enlarge Image

Template/Profilers

Shank mounted bearing profilers are ideal for template guidance.

Use for rebating and trimming edges only.
Extra care must be taken to avoid cutter breakage.

Rollover or click each image to enlarge

Click each Product Ref. for full product information

Product Ref.

D
mm

D
inch

C
mm

C
inch

Shank
Dia.

Price

C121BX1/4TC

12.7

1/2

9.5

3/8

1/4

£ 19.20

C121CX1/4TC

15.9

5/8

1/4

£ 30.00

Enlarge Image

45 Degree Pin Guided Chamfer Cutter

Ideal for fast chamfering.

Popular in the sign making trades.
For chamfering edges of plastic material .

Rollover or click each image to enlarge

Click each Product Ref. for full product information

Product Ref.

D
mm

C
mm

A
degrees

Shank
Dia.

Price

C049AX1/4TC

1/4

£ 22.80

Enlarge Image

Bearing Guided Bevel

Ideal for posts and newel caps for stairs.

Rollover or click each image to enlarge

Click each Product Ref. for full product information

Product Ref.	D mm	C mm	B mm	A degrees	Shank Dia.	Price
C138CX1/4TC	22.9	19.1	12.7	70	1/4	£ 34.80
C138AX1/4TC	34.9	20.6	12.7	60	1/4	£ 34.80
C138BX1/4TC	30.9	22.2	12.7	67.5	1/4	£ 34.80

Enlarge Image

Chamfer 'V' Groove

For veining, panelling, 'V' grooving, bevelling & chamfering.

Rollover or click each image to enlarge

Click each Product Ref. for full product information

Product Ref.	D mm	D inch	C mm	OL mm	A degrees	Shank Dia.	Price
C044AX1/2TC	19	3/4	9.2		45	1/2	£ 18.00
C043AX1/4TC	19.1	3/4		70.5	60	1/4	£ 22.80
C045AX1/2TC	32	1 1/4	15		45	1/2	£ 38.40
C045CX1/2TC	51	2	25		45	1/2	£ 70.80