New Routing Accessories

Guide Bush Metal

Guide bush guides the router when using a template.

• Fits directly to Trend T3,T4,T5,T5 MK2, T9,T10 and T11, and some other light duty routers.
• Will fit other makes when used with GB/5, GB/PLATE or UNIBASE Sub-base.

No volt release switch

Trips power to the machine should the power be momentarily cut off.

• The switch must be bolted directly to router table leg or a user made workboard.
• Plug cable is 1.7 metre in length.

Hex key set

16 piece set of mini hex keys.

• Made from Chrome Vanadium steel for strength and durability.
• Metric sizes from 0.7mm to 3mm A/F.
• Imperial sizes from 0.028 inch to 9/64 inch A/F.
• Ideal for router cutters, modellers, engineers, automotive, DIY and electronics.

Hard wearing carry case for the Drainer Groove or Belfast Sink jig.

• Will accept both jigs at same time.
• Adjustable shoulder strap and carry handle.
• Flap with velcro closer.
• Accessory pouch for sub bases.
• Can also be used for the STAIR/A and STAIR/B.

Double Sided Tape

Heavy duty double sided sticky tape.

• Ideal where temporary fixing is required for example when jig making. Can be removed with your thumb.
• Rayon cloth coated with rubber resin adhesive for a strong hold.
• Siliconised paper release liner.
• Cut with a knife or scissors.
• 25mm width x 25 metres.