New Clamping

Varijig clamp guide

For accurate guiding of router, saws and jigsaws.

• Integral clamping jaws and a locking lever provide a quick way of clamping the guide batten.
• Ideal for holding and clamping work pieces.
• Aluminium extrusion incorporating T-slots.
• The clamps are fitted with a metric/imperial scale for setting lengths and stop positions. Scale can be be positioned by removing 20mm of the self adhesive backing.
• Three lengths of clamp available 24 inch, 36 inch and 50 inch.
• Router not included.
• Patent No. US7,007,731.

Varijig clamp guide pro

Extra long clamp guide for accurate guiding of router, saws and jigsaws.

• Integral clamping jaws and a locking lever provide a quick way of clamping the guide batten.
• Ideal for holding and clamping work pieces.
• This extra long clamp features a wider aluminium extrusion ideal for machining large panel material.
• Aluminium extrusion incorporating T-slots.
• The clamps are fitted with a 1280mm long metric/imperial scale for setting lengths and stop positions. Scale can be positioned by removing 20mm of the self adhesive backing.
• Router and router base plate not included.
• Sliding bridge fitted to underside to support bar.
• Patent No. US7,007,731.

Varijig clamp guide router base plate

Plunge router base base accessory for the Varijig clamp guides.

• Base plate engages in the T-slot in the extrusion.
• Made from clear plastic.
• Includes adjustable guide bar for perfect tracking using hex key provided.
• Fits all Varijig clamp guides.
• Clear plastic allows for good visibility.
• User must drill plate to fix router.
• Varijig clamp guide and router not included.

Varijig clamp guide end stop block

Varijig clamp guide adjustable end stop block.

• Engages in the T slot on the clamp guide extrusion and can be locked in position using locking knob.
• Can be used with all Varijig frame system extrusions.
• Varijig clamp guide not included.

Varijig clamp guide handle lever extension

Lever extension handle for Varijig clamp guides.

• Gives better leverage to operate the clamp, especially when more clamping pressure is required.
• Slides onto Varijig clamp guide lever.
• Increases lever length by 134mm.
• Varijig clamp guide not included.

Varijig clamp guide jaw kit

Pair of plastic jaws that are screwed onto the jaws of the Varijig clamp guides.

• Distributes clamping pressure over the workpiece to minimise clamping marks.
• Allows Varijig clamp guide to be squared up to the wood edge.
• Built in mounting holes allow a false batten to be fitted to increase jaw width further.
• Varijig clamp guide not included.

Varijig clamp guide saw base plate

Circular saw base base accessory for the Varijig clamp guides.

• Base plate engages in the T-slot in the extrusion.
• Made from plastic.
• Includes adjustable guide bar for perfect tracking using hex key provided.
• Includes adjustable guide bar for perfect tracking.
• Fits all Varijig clamp guides.
• User must drill plate to fix circular saw.
• Varijig clamp guide and saw not included.

Varijig clamp guide squaring attachment

Allows Varijig clamp guide to be squared up more accurately.

• Large 90 degree head allows the Varijig clamp guide to be used as a clamping T- square.
• Serrated front edge for grip.
• It is secured to fixed jaw using two self tapping screws.
• Varijig clamp guide not included.

Loc blocks

Pack of four interlocking gripping blocks that lock together to allow workpiece to be held in place when sanding, drilling and finishing.

• No need to use clamps. Set-up in seconds.
• Grips both workpeice and bench.
• Lifts workpiece from bench, to allow complete access to every edge.
• Can be used for routing when extra care should be taken to prevemt material lift.
• Anti-vibration, non-slip, non-marring rubber pads on both the top and bottom of the blocks.
• Size when four blocks interlocked 173mm x 173mm.