Collet Extensions

Collet extension 1/2 inch

For use in router tables where there is a limited router cutters shank length available.

• Precision machined one-piece steel body.
• With a 1/2 inch shank, fitted with a multi-slit spring steel collet and collet nut.
• Use at maximum speed 18000 RPM.
• Increase cutter spindle length by 50mm.
• Maximum tool diameter 50mm.
• Maximum tool cut length 30mm.
• Requires 19mm & 22mm A/F spanners.

Collet extension 12mm

For use in router tables where there is a limited router cutters shank length available.

• Precision machined one-piece steel body.
• With a 12mm shank, fitted with a multi-slit spring steel collet and collet nut.
• Use at maximum speed 18000 RPM.
• Increase cutter spindle length by 50mm.
• Maximum tool diameter 50mm.
• Maximum tool cut length 30mm.
• Requires 19mm & 22mm A/F spanners.

Collet extension 12mm shank

For use in router tables where there is a limited router cutters shank length available.

• Precision machined one-piece steel body.
• With a 12mm shank, fitted with a multi-slit spring steel collet and collet nut.
• Use at maximum speed 18000 RPM.
• Increase cutter spindle length by 50mm.
• Maximum tool diameter 50mm.
• Maximum tool cut length 30mm.
• Requires 19mm & 22mm A/F spanners.

Collet extension 8mm shank

The new size has an 8mm shank and 1/4 inch collet, and should be used with medium duty routers of minimum 850 watts, use at maximum speed 18000 RPM and maximum cutter diameter 35mm.

• Increases spindle length by 41mm.
• Maximum tool cut length 25mm.
• Requires 12mm & 17mm A/F spanners.

Collet extension collet & nut set

Multi-slit spring steel collet & nut set for the 1/2 inch or 12mm shank collet extension.

Collet extension collet nut

Multi-slit spring steel collet & nut set for the 1/2 inch or 12mm shank collet extension.