Combi and Bevel Laminate Trimmers

Combi trimmer

For trimming top & lip.

• Economical cutters, perform 3 functions:
• 1. To top trim the overlay at 90 degrees.
• 2. To trim the overlay at 45 degrees or 60 degrees.
• 3. The base of the cutter can trim the vertical lipping at 90 degrees.
• Requires side fence or roller bearing.

With 3 cutting edges

Three bevel cutters for edging .

• For trimming laminate, when a wider edge line is preferred on the finished edge.
• Supplied in 80 degree, 60 degree and 30 degree versions of bevel angle.
• No bottom cut.