Professional HSS Cutters

Two Flute

These are made from a single piece of High Speed Steel, ground with a very fine edge. They are only suitable for non abrasive materials, but will give a superior finish in soft timbers. Generally HSS cutters are slightly less expensive than their TC grades, but can be more suitable for certain applications.

• Suitable for general grooving and rebating.

Ovolo & Rounding Over

These are made from a single piece of High Speed Steel, ground with a very fine edge.

• They are only suitable for non abrasive materials, but will give a superior finish in soft timbers.
• Generally HSS cutters are slightly less expensive than their TC grades, but can be more suitable for certain applications.
• Ovolo & Rounding Over for panel grooving and simple round overs.

Pin Guided Round Over

These are made from a single piece of High Speed Steel, ground with a very fine edge. They are only suitable for non abrasive materials, but will give a superior finish in soft timbers. Generally HSS cutters are slightly less expensive than their TC grades, but can be more suitable for certain applications.

• Ovolo & Rounding Over for panel grooving and simple round overs.

Chamfer V Groove

These are made from a single piece of High Speed Steel, ground with a very fine edge.

• They are only suitable for non abrasive materials, but will give a superior finish in soft timbers.
• Generally HSS cutters are slightly less expensive than their TC grades, but can be more suitable for certain applications.
• Chamfer 'V' groove for veining, panelling, 'V' grooving. bevelling & chamfering.

Dolls house architrave and skirting

Dolls house architrave & skirting cutter.

Dolls house classic georgian mould

Dolls house classic georgian mould cutter.

Dolls house classic ogee

Dolls house classic ogee cutter.

Dolls house multi mould

Dolls house multi-mould cutter.

Dolls house torus/handrail

Dolls house torus/handrail cutter.

Multi reed 1.5mm radius

Dolls house multi-reed cutter.

Multi reed 3mm radius

Dolls house multi-reed cutter.

Routaseal Cutters

Cuts groove for Trend Routaseal.

• Position seal into apex of jamb and stop.
• More economic to use than more complex seals.
• Use with a small 1/4 inch shank hand router.
• Short shank.

Plunge Slotting

Cutter is designed to plunge and machine or mill lateral slots.

• Aluminium tooling should be used with a coolant, wax stick or lubricant.
• Material should be securely clamped.
• For drilling and slotting, cutting aluminium anodised duralium and UPVC.
• Ideal for recessing and slotting extrusions.
• HSSE is a special grade for machining the most abrasive anodised finishes.
• Use at speed 10000 - 12000 RPM.

Straight Rotox with M10 thread

Cutter are designed to plunge and machine or mill lateral slots.

• All aluminium tooling should be used with a coolant, wax stick or lubricant.
• Material should be securely clamped.
• Straight Rotox cutters with M10 X 1.5mm internal thread, for uPVC plastics and aluminium.