Routing Jigs

Large Routabout

Access to pipes & cables beneath chipboard floors in seconds.

• For builders, plumbers & electricians.
• A 250mm diameter opening can be cut and made good in seconds.
• Designed for use in new or existing 18mm chipboard or similar floors.
• Cuts only the thickness of the board.
• No waste, the piece cut out is used to make good the floor.
• All you need is a plunge router (750 watts or above).
• A Unibase may be required for certain makes and models of router.
• Patent No. GB2238751.

Corner frame

Frame for Corner Designs.

• Revolutionary routing concept that creates variable depth intricate wood carvings with a hand router.
• Woodcarvings can be made on new or existing doors, frames and drawer fronts.

Handle frame

Handle Surround Designs frame.

• Revolutionary routing concept that creates variable depth intricate wood carvings with a hand router.
• Woodcarvings can be made on new or existing doors, frames and drawer fronts.
• Allows for the utilisation of a variety of cabinet and drawer handles.
• External dimensions 570mm x 210mm.
• Internal dimensions 280mm x 150mm.

Kitchen frame

Frame for Kitchen Door Designs.

• Revolutionary routing concept that creates variable depth intricate wood carvings with a hand router.
• Woodcarvings can be made on new or existing doors, frames and drawer fronts.

Router carver

Small frame.

• Revolutionary routing concept that creates variable depth intricate wood carvings with a hand router.
• Woodcarvings can be made on new or existing doors, frames and drawer fronts.

Router carver handle surround

Revolutionary routing concept that creates variable depth intricate wood carvings with a hand router.

• Woodcarvings can be made on new or existing doors, frames and drawer fronts.
• Templates have accurately shaped slots with varying widths which guide the Router Carver both horizontally and vertically.
• Allows for the utilisation of a variety of cabinet and drawer handles.

Router carver kitchen door template

Revolutionary routing concept that creates variable depth intricate wood carvings with a hand router.

• Woodcarvings can be made on new or existing doors, frames and drawer fronts.
• Templates have accurately shaped slots with varying widths which guide the Router Carver both horizontally and vertically.
• The 8mm Router Carver cutter cannot be used with this template.

Joinaboard Jointing Jig

Quick and easy end to end dovetail jointing with router in one operation.

• For decorative panelling, floorboards, skirting, jointing offcuts and tongue and grooving.
• Solid aluminium template.
• Adjustable template offset.
• Can be taken to the workpiece.
• For use with a heavy duty router.
• Please note router cutter ref L90X1/2TC not included in jig and available as an accessory only.