New Routing Accessories

Collet sleeves

Reduction sleeve is used to reduce the collet size to take cutters with smaller shanks. Should only be used as a stop-gap, as the the correct size collet is recommended. Should not be used for extensive periods or heavy work.

Pair of pivoting sliding friction clamps with 2 inch clamping thickness.

• 360 degree clamps
• Clamp rotates to allow the pad of the clamp to be secured firmly to the work-piece.
• The clamp can be used with the Varijig system including the varijig set, straight guides and angle guide.
• Aluminium body.
• Friction lock design, so they can be positioned in extrusion without sliding out end when clamp lifted up.
• Soft pads to prevent marring of component.