Trend Snappy

Standard quick chuck

This is fitted into a standard 3/8 inch key or keyless chuck.

• Trend Snappy attachments or any direct drive 1/4 inch hex bits can then 'snap' in effortlessly.
• Six flats on the shank ensure precise location in the chuck.
• A spring loaded outer sleeve makes it easy to remove attachments.
• Patent No. US5,398,946.

Extra long 3" quick chuck

Extra long chuck in length with a smaller diameter head, to give ease of access.

• This chuck will accept both direct drive and insert type bits.
• Can be fitted to the Quick Chuck or directly into the drill chuck.

Extra long 6" quick chuck

Extra long chuck in length with a smaller diameter head, to give ease of access.

• This chuck will accept both direct drive and insert type bits.
• Can be fitted to the Quick Chuck or directly into the drill chuck.

Hand Driver

This quick chuck with a sturdy handle, allows the use of all Trend Snappy shank direct drive tools.

• Supplied with a magnetic screwdriver holder and No.2 Pozi bit.

Hand Driver Set

A Trend Snappy chuck hand driver and 31 piece screwdriver bit set.

• Hand-driver allows certain Trend Snappy shank direct drive tools to be used in applications where access is awkward or where a cordless can not be used.
• The 31 piece set covers all different screw fixing options.

Keyless chuck

Keyless chuck that can be used in quick chucks and impact drivers to hold parallel shank drills bits up to 1/4 inch.

• Clamping capacity 0.8mm (1/32 inch) to 6mm (1/4 inch).
• Enhanced gripping power when compared to traditional key type drill chucks.
• Lightweight with plastic body.
• Fitted with Trend Snappy shank 1/4 inch hex shank adaptor.

Magnetic quick chuck

Magnetic chuck accepts Trend Snappy shank fitting tools and insert style screwdriver bits.

• Magnet will hold wood screws when used with insert bits.
• Accepts 50mm screwdriver bits and 25mm screwdriver bits.
• Small diameter.

SDS quick chuck

For SDS plus drills.

• Hammer action must be switched off when used.

Yankee quick chuck

For 5/16 inch No. 131A Yankee Spiral ratchet screwdrivers (Large).

• The Quick Chuck replaces a standard bit and then enables Trend Snappy tools to be used.

Drill HSS in spring steel collet

The HSS drill bit is gripped by a spring steel collet into the hex shaft.

• The hex shanks snap into the Quick Chuck.

Drill HSS in spring steel collet - metric

The HSS drill bit is gripped by a spring steel collet into the hex shaft.

• The hex shanks snap into the Quick Chuck.

Hex Protector

The hex collar enable drills to be removed with two spanners.

For Ready-to-Assemble bolts

Step drill with hardened cutting edges for furniture construction bolts.

• Supplied with HSS slow spiral drill.

Masonry drill 4 piece set

Tungsten Carbide Tipped masonry drills to suit wall plugs.

• For drilling into plaster walls, plasterboard, mortar, brick and building blocks.

Masonry drill 5 piece set with depth bands

Tungsten Carbide Tipped masonry drill bit set with colour depth bands to suit wall plugs.

• Colour bands on drills allow easy selection of wall plug and allow for setting of drilling depth to suit wall plug.
• 5mm drill with yellow band.
• 5.5mm drill with orange band.
• 6mm drill with red band.
• 7mm drill with brown band.
• 8mm drill with grey band.
• For drilling into plaster walls, plasterboard, mortar, brick and building blocks.

Masonry drill 8 piece set in tool holder

Tungsten Carbide Tipped masonry drill bit set in tool holder.

• Unique tool holder includes removable inner section with Velcro elasticated cartridges to accept an extra 8 hex power drive shanks and 8 insert bits.
• Sizes 3mm, 4mm, 5mm, 5.5mm, 6mm, 6.5mm, 7mm and 8mm.
• For drilling into plaster walls, plasterboard, mortar, brick and building blocks.

Masonry drill to suit wall plugs

Tungsten Carbide Tipped masonry drill to suit wall plugs.

For glass, porcelain, tile and mirrors

TCT drill for use on glass, porcelain, tile and mirrors.

• Not for use on toughened glass.
• A coolant must be used.