Trend
Your country: UK
Login  |  Register
Items 0  |   View order
Products Knowledge Projects News Courses Glossary Compatibility Shows Downloads
Search
Enter product ref. or keyword
View all on-line videos
Find your nearest Trend stockist
Find
Full stockist search page
New CraftPro Router Cutters
New Products  >  New CraftPro Router Cutters

New CraftPro Router Cutters

  

Enlarge ImageEnlarge Image

Single Flute Straights

Single fluted Tungsten Carbide straight cutter for fast free cutting.

  • Single flutes should be chosen where speed and clearance rates are more important than the finish.
  • Depth of cut should not exceed cutter diameter.
2-55_dd.jpg
      Enlarge ImageRollover or click each image to enlarge
   Click each Product Ref. for full product information
Product Ref. D
mm		 C
mm		 OL
mm		 Shank
Dia.		 Price  
C034BX1/4TC 1.5 6 43 1/4 £ 13.50 +VAT More
C034CX1/4TC 3 11 50 1/4 £ 14.50 +VAT More

Enlarge ImageEnlarge Image

Two Flute Straight

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising.

  • Use on softwoods, hardwoods, MDF, plywood and chipboard.
  • All cutters have a bottom cut feature.
c002_dd.jpg
      Enlarge ImageRollover or click each image to enlarge
   Click each Product Ref. for full product information
Product Ref. D
mm		 D
inch		 C
mm		 C
inch		 OL
mm		 Shank
Dia.		 Price  
C001EX1/4TC 2.5 8 48 1/4 £ 11.50 +VAT More
C005X1/2TC 6 16 61 1/4 £ 10.00 +VAT More
C012BX1/2TC 9 19 3/4 68 1/2 £ 12.00 +VAT More
C016CX1/4TC 10 25/64 25 57 1/4 £ 13.50 +VAT This product is out of stock. Please see product detail for in-stock date.
C016CX1/2TC 10 25/64 25 69 1/2 £ 13.50 +VAT More
C019X1/2TC 12 15/32 19.1 3/4 61 1/2 £ 14.00 +VAT More
C019BX1/2TC 12 25 68 1/2 £ 14.00 +VAT More
C171AX1/2TC 12 15/32 38 1 1/2 80 1/2 £ 16.00 +VAT More
C023CX1/2TC 14.0 50 2 95 1/2 £ 27.00 +VAT More
C024AX1/2TC 15.0 19/32 25 1 67 1/2 £ 14.00 +VAT More
C024BX1/2TC 15.0 35 76 1/2 £ 15.00 +VAT More
C024CX1/2TC 15.0 50 2 88 1/2 £ 27.00 +VAT More
C025CX1/2TC 15.9 5/8 32 1 1/4 74 1/2 £ 21.00 +VAT More
C025EX1/2TC 15.9 5/8 63 2 1/2 105 1/2 £ 32.00 +VAT More
C025AX1/2TC 16 19 3/4 60 1/2 £ 16.00 +VAT This product is out of stock. Please see product detail for in-stock date.
C028AX1/2TC 18 45/64 25 63/64 67 1/2 £ 17.00 +VAT This product is out of stock. Please see product detail for in-stock date.
C030BX1/2TC 19 50 92 1/2 £ 28.00 +VAT More
C030CX1/2TC 20 25 66 1/2 £ 18.00 +VAT More
C033BX1/2TC 25.4 1 50 68 1/2 £ 22.00 +VAT More
C033CX1/2TC 25.4 1 37 79 1/2 £ 33.00 +VAT More
C033EX1/2TC 26 1 1/32 25 65 1/2 £ 29.00 +VAT More
C033FX1/2TC 27 1 1/16 50 72 1/2 £ 30.00 +VAT More
C033GX1/2TC 28 1 7/64 25 66 1/2 £ 33.00 +VAT More
C033HX1/2TC 28.5 1 1/8 25 67 1/2 £ 33.00 +VAT More
C033KX1/2TC 31.8 1 1/4 25 67 1/2 £ 34.00 +VAT More
C033NX1/2TC 35 1 3/8 25 67 1/2 £ 36.00 +VAT More
C033PX1/2TC 38.1 1 1/2 25 66 1/2 £ 42.00 +VAT More
C033QX1/2TC 40 1 37/64 25 67 1/2 £ 44.00 +VAT More
C033RX1/2TC 41.3 1 5/8 25 67 1/2 £ 39.00 +VAT More
C033TX1/2TC 44.5 1 3/4 25 63 1/2 £ 45.00 +VAT More
C033WX1/2TC 50 1 31/32 25 63 1/2 £ 46.00 +VAT More
C033VX1/2TC 47.6 1 7/8 25 63 1/2 £ 45.00 +VAT More
C033YX1/2TC 50.8 2 25 66 1/2 £ 46.00 +VAT More

Enlarge ImageEnlarge Image

For grooves and trenches

Template thickness should be 5mm thicker than cut length of cutter.

  • Can be used to rout both tenons and housings.
21-1_dd.jpg
      Enlarge ImageRollover or click each image to enlarge
   Click each Product Ref. for full product information
Product Ref. D
mm		 D
inch		 C
mm		 B
mm		 Shank
Dia.		 Price  
C226X1/4TC 19.1 3/4 11.1 19.1 1/4 £ 25.00 +VAT More
C226X1/2TC 19.1 3/4 11.1 19.1 1/2 £ 25.00 +VAT More

Enlarge ImageEnlarge Image

Hinge recess

Two flute TC cutter giving good chip clearance.

  • Ideal for shallow lateral routing cuts such as recessing hinges.
  • Corners will require final trimming square with a hand chisel or a corner chisel.
5-2_dd.jpg
      Enlarge ImageRollover or click each image to enlarge
   Click each Product Ref. for full product information
Product Ref. D
mm		 D
inch		 C
mm		 OL
mm		 Shank
Dia.		 Price  
C235X1/4TC 12.7 1/2 19 51 1/4 £ 15.00 +VAT More
C236X1/4TC 15.9 5/8 19 51 1/4 £ 15.50 +VAT More
C237X1/4TC 19.1 3/4 19 51 1/4 £ 16.50 +VAT More

Enlarge ImageEnlarge Image

Pocket Cutters

A two flute cutters with extra long shanks.

  • Deep grooving, rebating and mortising.
  • Useful for template work when thickness of template restricts depth.
  • Extra care must be taken to avoid breakage.
  • Take more passes than usual, and only cut up to half the diameter of the cutter in one pass.
  • This applies to cutters under 3/8 inch diameter.
3-55l_dd.jpg
      Enlarge ImageRollover or click each image to enlarge
   Click each Product Ref. for full product information
Product Ref. D
mm		 D
inch		 C
mm		 OL
mm		 Shank
Dia.		 Price  
C007LX1/4TC 6.3 1/4 19 70 1/4 £ 14.00 +VAT More

Enlarge ImageEnlarge Image

Self Guided Bevel Trimmers

This is bearing guided and gives a smooth bevel finish for laminates and other materials.

  • Bearing follows the board beneath.
c119_dd.jpg
      Enlarge ImageRollover or click each image to enlarge
   Click each Product Ref. for full product information
Product Ref. D
mm		 C
mm		 B
mm		 A
degrees		 Shank
Dia.		 Price  
C119AX1/4TC 14 14 12.7 83 1/4 £ 27.00 +VAT More

Enlarge ImageEnlarge Image

Self Guided Trimmers

Used for trimming plastic or plywood overlays.

  • Also for copy profiling with a template.
c117_dd.jpg
      Enlarge ImageRollover or click each image to enlarge
   Click each Product Ref. for full product information
Product Ref. D
mm		 D
inch		 C
mm		 C
inch		 B
mm		 A
degrees		 Shank
Dia.		 Price  
C115AX1/4TC 9.5 3/8 25.4 1 9.5 90 1/4 £ 14.50 +VAT This product is out of stock. Please see product detail for in-stock date.
C116AX1/4TC 12.7 1/2 16 5/8 12.7 90 1/4 £ 13.50 +VAT More
C117AX1/4TC 19.1 3/4 25 1 15.9 90 1/4 £ 19.00 +VAT This product is out of stock. Please see product detail for in-stock date.
C117AX1/2TC 19.1 3/4 25 1 15.9 90 1/2 £ 19.00 +VAT More
C117BX1/2TC 19.1 3/4 50 15.9 90 1/2 £ 35.00 +VAT This product is out of stock. Please see product detail for in-stock date.

Enlarge ImageEnlarge Image

Strip recessers

Recessing cutter for producing double rebates.

  • For producing recesses with a lower rebate.
  • Designed to accept library/bookcase strip. Ref. C231 is specifically designed for Tonk Strip.
36-3_dd.jpg
      Enlarge ImageRollover or click each image to enlarge
   Click each Product Ref. for full product information
Product Ref. D
mm		 D2
mm		 C
mm		 Shank
Dia.		 Price  
C231X1/4TC 9.5 19 13 1/4 £ 26.00 +VAT More
C231X1/2TC 9.5 19 13 1/2 £ 26.00 +VAT More
C230X1/4TC 13 19 10 1/4 £ 34.00 +VAT More

Enlarge ImageEnlarge Image

Template/Profilers

Shank mounted bearing profilers are ideal for template guidance.

  • Use for rebating and trimming edges only.
  • Extra care must be taken to avoid cutter breakage.
46-91_dd.jpg
      Enlarge ImageRollover or click each image to enlarge
   Click each Product Ref. for full product information
Product Ref. D
mm		 D
inch		 C
mm		 C
inch		 Shank
Dia.		 Price  
C121BX1/4TC 12.7 1/2 9.5 3/8 1/4 £ 16.00 +VAT More
C121CX1/4TC 15.9 5/8 25 1/4 £ 25.00 +VAT More

Enlarge ImageEnlarge Image

45 Degree Pin Guided Chamfer Cutter

Ideal for fast chamfering.

  • Popular in the sign making trades.
  • For chamfering edges of plastic material .
10h-1_dd.jpg
      Enlarge ImageRollover or click each image to enlarge
   Click each Product Ref. for full product information
Product Ref. D
mm		 C
mm		 A
degrees		 Shank
Dia.		 Price  
C049AX1/4TC 25 10 45 1/4 £ 19.00 +VAT More

Enlarge ImageEnlarge Image

Bearing Guided Bevel

Ideal for posts and newel caps for stairs.
c138b_dd.jpg
      Enlarge ImageRollover or click each image to enlarge
   Click each Product Ref. for full product information
Product Ref. D
mm		 C
mm		 B
mm		 A
degrees		 Shank
Dia.		 Price  
C138CX1/4TC 22.9 19.1 12.7 70 1/4 £ 29.00 +VAT More
C138AX1/4TC 34.9 20.6 12.7 60 1/4 £ 29.00 +VAT More
C138BX1/4TC 30.9 22.2 12.7 67.5 1/4 £ 29.00 +VAT More

Enlarge ImageEnlarge Image

Chamfer 'V' Groove

For veining, panelling, 'V' grooving, bevelling & chamfering.
c044_dd.jpg
      Enlarge ImageRollover or click each image to enlarge
   Click each Product Ref. for full product information
Product Ref. D
mm		 D
inch		 C
mm		 OL
mm		 A
degrees		 Shank
Dia.		 Price  
C044AX1/2TC 19 3/4 9.2 45 1/2 £ 15.00 +VAT More
C043AX1/4TC 19.1 3/4 70.5 60 1/4 £ 19.00 +VAT More
C045AX1/2TC 32 1 1/4 15 45 1/2 £ 32.00 +VAT More
C045CX1/2TC 51 2 25 45 1/2 £ 59.00 +VAT More

Enlarge ImageEnlarge Image

Chamfer 'V' Groove Shank Mounted Bearing

For veining, panelling, 'V' grooving, bevelling & chamfering.
c044_dd.jpg
      Enlarge ImageRollover or click each image to enlarge
   Click each Product Ref. for full product information
Product Ref. D
mm		 D
inch		 C
mm		 A
degrees		 Shank
Dia.		 Price  
C045BX1/2TC 38 1 1/2 19 45 1/2 £ 33.00 +VAT