Trend
Your country: UK
Login  |  Register
Items 0  |   View order
Products Knowledge Projects News Courses Glossary Compatibility Shows Downloads
Search
Enter product ref. or keyword
View all on-line videos
Find your nearest Trend stockist
Find
Full distributor search page
Professional TCT Cutters
B and C Grade Stock  >  Professional TCT Cutters

Professional TCT Cutters

  

Enlarge ImageEnlarge Image

Diameters from 2.0mm to 12.7mm

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.

  • Two flutes give a clean finish to cut edges.
  • All cutters above and including 9.5mm diameter, have TCT plunge centre tips.
3-12_dd.jpg
      Enlarge ImageRollover or click each image to enlarge
   Click each Product Ref. for full product information
Product Ref. D
mm		 D
inch		 C
mm		 OL
mm		 Shank
Dia.		 Price  
B*3/22X3/8TC 6.3 1/4 25 62 3/8 $ 15.00 +VAT This is a B Grade Stock product and may have damage to packaging. A 12 months guarantee applies. Available while stocks last.

Enlarge ImageEnlarge Image

Eccentric single flute

Eccentric single flute cutters.

  • Cutters are chosen for fast free cutting, when cutting speed takes preference over finish.
  • Cutters with prefix S are Solid Carbide.
  • Cutters of 2.0mm diameter and below should have a maximum of 1.0mm depth of cut per pass.
  • Small diameter tools must be handled with care to avoid breakage.
  • Single flute cutters should not be used in eccentric chucks.
2-4_dd.jpg
      Enlarge ImageRollover or click each image to enlarge
   Click each Product Ref. for full product information
Product Ref. D
mm		 C
mm		 OL
mm		 Shank
Dia.		 Price  
B*2/3X3/8TC 4 11 46 3/8 $ 10.50 +VAT This is a B Grade Stock product and may have damage to packaging. A 12 months guarantee applies. Available while stocks last.

Enlarge ImageEnlarge Image

Pin guided rebaters to follow work edges

The guide pin follows the work edge to give a preset width of rebate.

  • Ref. 8D/4 can be used to create a counterbore for a slot to accept M5 and M6 pan head screws.
8d-2_dd.jpg
      Enlarge ImageRollover or click each image to enlarge
   Click each Product Ref. for full product information
Product Ref. C
mm		 E
mm		 Shank
Dia.		 Price  
B*8D/2X1/4TC 14 9.5 1/4 $ 15.00 +VAT This is a B Grade Stock product and may have damage to packaging. A 12 months guarantee applies. Available while stocks last.

Enlarge ImageEnlarge Image

Bearing Guide 90 degree

Blades of cutters Refs. 46/01 & 46/03 can be rotated through 180 degrees to give one new cutting edge.

  • Blades for 46/010 can be rotated by exchanging blades over.
  • Refs 46/02 have blades that can be rotated in 90 degree increments giving three extra new edges.
46-02_dd.jpg
      Enlarge ImageRollover or click each image to enlarge
   Click each Product Ref. for full product information
Product Ref. D
mm		 D
inch		 C
mm		 OL
mm		 B
mm		 A
degrees		 Shank
Dia.		 Price  
B*46/01X1/4TC 12.7 1/2 8 57 12.7 90 1/4 $ 21.50 +VAT This is a B Grade Stock product and may have damage to packaging. A 12 months guarantee applies. Available while stocks last.

Enlarge ImageEnlarge Image

Bearing mounted on end of cutter

Self-guiding trimmers with bearings mounted on end of cutter.

  • For trimming plastic or plywood overlay.
  • For copy profiling, use the bearing to follow a template or base edge of board.
  • An approximate 3mm overlap should be left before copy profiling. When using plastic laminate adhesive to dry before trimming. This avoids clogging the guide bearing.
  • Refs. T46/1, 46/2 and 46/20 are downcut to prevent breakout on veneer.
  • Ref. 46/211 has a sleeved bearing to allow for regrinds in case of resharpening.
46-2_dd.jpg
      Enlarge ImageRollover or click each image to enlarge
   Click each Product Ref. for full product information
Product Ref. D
mm		 D
inch		 C
mm		 B
mm		 Shank
Dia.		 Price  
B*46/2X1/4TC 19.1 3/4 14 19.1 1/4 $ 20.00 +VAT This is a B Grade Stock product and may have damage to packaging. A 12 months guarantee applies. Available while stocks last.
B*46/2X8MMTC 19.1 3/4 14 19.1 8 mm $ 15.00 +VAT This is a B Grade Stock product and may have damage to packaging. A 12 months guarantee applies. Available while stocks last.

Enlarge ImageEnlarge Image

Combi trimmer

For trimming top & lip.

  • Economical cutters, perform 3 functions:
  • 1. To top trim the overlay at 90 degrees.
  • 2. To trim the overlay at 45 degrees or 60 degrees.
  • 3. The base of the cutter can trim the vertical lipping at 90 degrees.
  • Requires side fence or roller bearing.
47-7_dd.jpg
      Enlarge ImageRollover or click each image to enlarge
   Click each Product Ref. for full product information
Product Ref. D
mm		 C
mm		 Shank
Dia.		 Price  
B*47/7X1/4TC 12.7 12.7 1/4 $ 15.00 +VAT This is a B Grade Stock product and may have damage to packaging. A 12 months guarantee applies. Available while stocks last.
B*47/5X1/4TC 21 6 1/4 $ 18.00 +VAT This is a B Grade Stock product and may have damage to packaging. A 12 months guarantee applies. Available while stocks last.

Enlarge ImageEnlarge Image

Two flute flush trimmers

For trimming the lipping of plastic overlay, and for rebating and

  • machining wood, Duralium and plastics.
  • Tungsten Carbide Tipped.
  • Use at speed 12000 - 24000 RPM.
47-2_dd.jpg
      Enlarge ImageRollover or click each image to enlarge
   Click each Product Ref. for full product information
Product Ref. D
mm		 C
mm		 A
degrees		 Shank
Dia.		 Price  
B*47/2X1/4TC 18 12 90 1/4 $ 15.00 +VAT This is a B Grade Stock product and may have damage to packaging. A 12 months guarantee applies. Available while stocks last.

Enlarge ImageEnlarge Image

Mortar Groove & Large Chamfer

Use for producing mortar grooves and for bevelling applications.
10-1_dd.jpg
      Enlarge ImageRollover or click each image to enlarge
   Click each Product Ref. for full product information
Product Ref. D
mm		 C
mm		 A
degrees		 Shank
Dia.		 Price  
B*10/1X3/8TC 41 22.5 45 3/8 $ 20.00 +VAT This is a B Grade Stock product and may have damage to packaging. A 12 months guarantee applies. Available while stocks last.

Enlarge ImageEnlarge Image

For dovetails joints and sliding dovetails.

For dovetail joints and sliding dovetails.

  • To suit user preference, the table shows angles from the horizontal and the profiles show angles from the vertical.
31-02_dd.jpg
      Enlarge ImageRollover or click each image to enlarge
   Click each Product Ref. for full product information
Product Ref. D
mm		 C
mm		 A
degrees		 Shank
Dia.		 Price  
B*31/02X1/4TC 13.2 13 103 1/4 $ 10.00 +VAT This is a B Grade Stock product and may have damage to packaging. A 12 months guarantee applies. Available while stocks last.
B*31/5X3/8TC 16 16 100 3/8 $ 12.00 +VAT This is a B Grade Stock product and may have damage to packaging. A 12 months guarantee applies. Available while stocks last.

Enlarge ImageEnlarge Image

For use with commercial dovetailing and stair-housing jigs.

  • The cutter will produce sliding and lapped dovetails, through dovetails and end on dovetails.
  • Right hand rotation.
  • Purpose made for stair trenching machines.
      Enlarge ImageRollover or click each image to enlarge
   Click each Product Ref. for full product information
Product Ref. D
mm		 C
mm		 C
inch		 A
degrees		 Shank
Dia.		 Price  
B*32/1X3/8TC 15.8 25.4 1 95 3/8 $ 15.00 +VAT This is a B Grade Stock product and may have damage to packaging. A 12 months guarantee applies. Available while stocks last.
B*32/3X3/8TC 22.2 25.4 95 3/8 $ 15.00 +VAT This is a B Grade Stock product and may have damage to packaging. A 12 months guarantee applies. Available while stocks last.
B*32/2X3/8TC 19.1 25.4 95 3/8 $ 15.00 +VAT This is a B Grade Stock product and may have damage to packaging. A 12 months guarantee applies. Available while stocks last.

Enlarge ImageEnlarge Image

Without Bearings

Some Ovolo cutters can be used with radius cutters, to make rule joints.

  • Ref. 7/01 has an extra long shank of 40mm.
7-1_dd.jpg
      Enlarge ImageRollover or click each image to enlarge
   Click each Product Ref. for full product information
Product Ref. D
mm		 D2
mm		 C
mm		 R
mm		 Shank
Dia.		 Price  
B*7/1X1/4TC 18 12 10 3 1/4 $ 15.00 +VAT This is a B Grade Stock product and may have damage to packaging. A 12 months guarantee applies. Available while stocks last.

Enlarge ImageEnlarge Image

Pin Guided Ovolo Cutters

Small solid guide pin can follow more intricate shapes in contrast to bearing guided cutters.
7d-2_dd.jpg
      Enlarge ImageRollover or click each image to enlarge
   Click each Product Ref. for full product information
Product Ref. D
mm		 C
mm		 R
mm		 Shank
Dia.		 Price  
B*7D/1X1/4TC 15 10.2 3.2 1/4 $ 15.00 +VAT This is a B Grade Stock product and may have damage to packaging. A 12 months guarantee applies. Available while stocks last.
B*7D/3X1/4TC 29 16.5 9.5 1/4 $ 15.00 +VAT This is a B Grade Stock product and may have damage to packaging. A 12 months guarantee applies. Available while stocks last.

Enlarge ImageEnlarge Image

Pin Guided Round Over Cutters

Small solid guide pin can follow more intricate shapes in contrast to bearing guided cutters.
7e-3_dd.jpg
      Enlarge ImageRollover or click each image to enlarge
   Click each Product Ref. for full product information
Product Ref. D
mm		 C
mm		 B
mm		 R
mm		 Shank
Dia.		 Price  
B*7E/3X1/4TC 26 14.3 9 8 1/4 $ 15.00 +VAT This is a B Grade Stock product and may have damage to packaging. A 12 months guarantee applies. Available while stocks last.

Enlarge ImageEnlarge Image

Sash Bar Ovolo Joint

Designed for sash bar window construction.
6-50_dd.jpg
      Enlarge ImageRollover or click each image to enlarge
   Click each Product Ref. for full product information
Product Ref. D
mm		 C
mm		 Shank
Dia.		 Price  
B*6/50X1/4TC 25 20 1/4 $ 15.00 +VAT This is a B Grade Stock product and may have damage to packaging. A 12 months guarantee applies. Available while stocks last.

Enlarge ImageEnlarge Image

Staff Bead/Jointers

A long glue line gives extra strength. Can be used in conjuction with Refs. 9/10 & 9/11. Ideal for dus proof hinged joints in display stand.
8-11_dd.jpg
      Enlarge ImageRollover or click each image to enlarge
   Click each Product Ref. for full product information
Product Ref. D
mm		 C
mm		 R
mm		 Shank
Dia.		 Price  
B*8/10X1/4TC 18 22 1/4 $ 25.00 +VAT This is a B Grade Stock product and may have damage to packaging. A 12 months guarantee applies. Available while stocks last.
B*8/11X1/4TC 22 28 5 1/4 $ 20.00 +VAT This is a B Grade Stock product and may have damage to packaging. A 12 months guarantee applies. Available while stocks last.

Enlarge ImageEnlarge Image

With guide pin

Pin guided cutters permit freehand edging at considerable speed.

  • Ideal for cutting small intricate shapes.
13f-3_dd.jpg
      Enlarge ImageRollover or click each image to enlarge
   Click each Product Ref. for full product information
Product Ref. D
mm		 C
mm		 R
mm		 R
inch		 Shank
Dia.		 Price  
B*13F/1X1/4TC 14.4 12.8 1/4 $ 10.00 +VAT This is a B Grade Stock product and may have damage to packaging. A 12 months guarantee applies. Available while stocks last.
B*13F/3X1/4TC 23.8 16 9.5 3/8 1/4 $ 10.00 +VAT This is a B Grade Stock product and may have damage to packaging. A 12 months guarantee applies. Available while stocks last.

Enlarge ImageEnlarge Image

Cavetto/Panel Mould

These edge moulds can also be used to create panelling effects, when using the whole width of the cutter.
18-71_dd.jpg
      Enlarge ImageRollover or click each image to enlarge
   Click each Product Ref. for full product information
Product Ref. D
mm		 D2
mm		 C
mm		 R
mm		 Shank
Dia.		 Price  
B*18/72X1/4TC 22 10 15 9 1/4 $ 20.00 +VAT This is a B Grade Stock product and may have damage to packaging. A 12 months guarantee applies. Available while stocks last.

Enlarge ImageEnlarge Image

With Guide Pin

Self guiding for freehand edging.
8e-2_dd.jpg
      Enlarge ImageRollover or click each image to enlarge
   Click each Product Ref. for full product information
Product Ref. D
mm		 C
mm		 R
mm		 Shank
Dia.		 Price  
B*8E/1X1/4TC 25 13 4 1/4 $ 15.00 +VAT This is a B Grade Stock product and may have damage to packaging. A 12 months guarantee applies. Available while stocks last.

Enlarge ImageEnlarge Image

Without bearings

Classic ovolo cutter.

  • Use with a side fence.
7-80_dd.jpg
      Enlarge ImageRollover or click each image to enlarge
   Click each Product Ref. for full product information
Product Ref. D
mm		 C
mm		 R
mm		 Shank
Dia.		 Price  
B*7/84X3/8TC 44 28 5 3/8 $ 21.00 +VAT This is a B Grade Stock product and may have damage to packaging. A 12 months guarantee applies. Available while stocks last.

Enlarge ImageEnlarge Image

Classic Set

The classic method of producing cabinet panelled door and drawer fronts is made easy with the Profile Scriber set.

  • The components are rearranged on the arbor to cut the profile or the scribe.
psc-1_dd.jpg
      Enlarge ImageRollover or click each image to enlarge
   Click each Product Ref. for full product information
Product Ref. D
mm		 C
mm		 OL
mm		 B
mm		 R
mm		 Shank
Dia.		 Price  
B*PSC/2X8MMTC 46 15 70 22 5.9 8 mm $ 66.50 +VAT This is a B Grade Stock product and may have damage to packaging. A 12 months guarantee applies. Available while stocks last.
B*PSC/2X1/2TC 46 15 76 22 5.9 1/2 $ 66.50 +VAT This is a B Grade Stock product and may have damage to packaging. A 12 months guarantee applies. Available while stocks last.