Polycrystalline Diamond tipped cutter gives a significant increase in tool life compared to TC tooling.
- PCD also gives an accuracy of cut throughout the tool life and faster feed rates as well as reduced downtime.
- Use in fixed head, NC or CNC routers only.
- Use on MDF, HDF, hard natural timber, veneered and laminated particle board, plywood, hardboard and solid laminate.
- Single flute with TC plunge tip.
- For MDF, hardboard and solid laminate.
- Single flute prevents edge lines.
- High wear resistance.
- Longer tool life and therefore reduced downtime.
- Cannot be re-sharpened.