Routaseal Cutters and Seals

Routaseal cutter

Cuts groove for Trend Routaseal.

• Position seal into apex of jamb and stop.
• More economic to use than more complex seals.
• Use with a small 1/4 inch shank hand router.
• Use STC for abrasive material.

Routaseal strips

High grade silicon rubber weatherseal. Will stand temperature of -30 degrees to +200 degrees C. Recessed using a small 1/4" hand router. Can be slid or tucked in from the top face. Compresses to approx. 3.5mm. Groove depth should be 3mm.

Routaseal strips brown

High grade silicon rubber weatherseal. Will stand temperature of -30 degrees to +200 degrees C. Recessed using a small 1/4" hand router. Can be slid or tucked in from the top face. Compresses to approx. 3.5mm. Groove depth should be 3mm.