Dowel Drills

Lip and Spur - HSS

These have 2 flutes, 2 spurs and a centre brad point.

• Flutings are backed-off to give a radial relief and assist chip clearance.
• These groups of dowel drills are used mainly for drilling cross grained timber and particle board.
• These drills are not for use with routers and not suitable for masonry work.

Lip and Spur - Long Series HSS

These have 2 flutes, 2 spurs and a centre brad point.

• Flutings are backed-off to give a radial relief and assist chip clearance.
• These groups of dowel drills are used mainly for drilling cross grained timber and particle board.
• These drills are not for use with routers and not suitable for masonry work.

Lip and Spur - TCT

Has 2 flutes, 2 spurs and a centre brad point.

• Flutings are backed-off to give a radial relief and assist chip clearance.
• This drill is used mainly for drilling cross grained timber and particle board.
• Used in all branches of industry when clean cut holes are required.
• Give long life and can be resharpened.
• Have tapered spurs.
• The complete drill head is made from solid carbide.
• These drills are recommended for hard or abrasive materials.
• These drills are not for use with routers and not suitable for masonry work.