Multi-Boring

Multi-Bore Three flutes and no centre point

This machine bit is designed for recessing circular concealed hinges.

• The shank has a flat for securing and a grub screw for height adjustment.
• Use at recommended speeds of 6000RPM.
• Three flutes and three scribers.
• Specifically for use on thin boards.
• Gives a tear free blind hole.
• For use with stationary drilling machines only.

Multi-Borer Two flutes, no scribers and centre point

This machine bit is designed for recessing circular concealed hinges.

• The shank has a flat for securing and a grub screw for height adjustment.
• Use at recommended speeds of 10000RPM.

Multi-Boring countersink

This drill and countersink set are used extensively in the furniture industry.

• Features a TC tipped 60 degree taper slow spiral drill, as standard.
• Care should be taken to ensure flutes of drill align with flutes of countersink.
• Use at recommended speeds of 3000-6000RPM.

Multi-Boring dowel dril

This lip and spur dowel drill features Solid Carbide cutting tips, for continuous drilling of tear free dowel holes.

• Shank has one flat for positive holding.
• A threaded grub screw in the shank end allows for correct setting for a bank of drills.
• 57mm overall length.
• Negatively ground spurs for improved tear free holes.

Multi-Boring dowel drill

This lip and spur dowel drill features Solid Carbide cutting tips, for continuous drilling of tear free dowel holes.

• Shank has one flat for positive holding.
• A threaded grub screw in the shank end allows for correct setting for a bank of drills.
• 57mm overall length.
• Negatively ground spurs for improved tear free holes.
• Quantities of 10 are supplied in snap-off compartments.

Multi-Boring thru drill

This 60 degree taper multi-boring drill is ideal for end grain and through hole drilling applications.

• Reduces the likelihood of break out to a minimum.
• Drill has a Solid Carbide cutting tip.
• Shank has one flat for positive holding.
• A threaded grub screw in the shank end allows for correct setting for a bank of drills.
• 57mm overall length.