Bearing Guided Chamfer Cutters

45 Degree Bearing Guided Chamfer

Ideal for newel posts and caps for stairs.

• Supplied with one bearing.

45 Degree Bearing Guided Three Flute Chamfer

Three flutes for extra fine finish.

• Ideal for newel posts and caps for stairs.
• Supplied with one bearing..

Bearing Guided Adjustable Chamfer

This adjustable chamfer set can be used to produce chamfers on the top and bottom edges.

• The width of timber accommodated by the cutter can be varied by adding spacers above and below the guide bearing.
• Smaller timber thicknesses can be accommodated by moving the bearing below both blocks.
• By reversing the positions of the blocks, an alternative angle can be achieved.

Bearing Guided Bevel

Useful for bevelling thick timbers.

• Certain sizes can be used for jointing, boxes, pilasters and carcassing.
• For full bevels, template should be fitted to component.

Bearing Guided Chamfer

Larger bearing removes the flat.

• Supplied with two bearings.

Pin Guided Chamfer

Ideal for fast chamfering.

• Popular in the sign making trades.
• For chamfering edges of plastic material .

Shank Mounted Bearing Chamfer

Template thickness should be at least 5mm thicker than cutter cut length of cutter.

• Approx. 1.0mm flat will be found on nose.