Bearing Guided Ovolo and Rounding Over

With alternative bearing

Self-guiding cutters for rounding over edges do not require a side fence.

• They are supplied with two bearings.
• Use the larger bearing for a round-over.
• If the cutter is lowered, a top quirk can be produced.
• A full round/bullnose for stair treads can also be produced by taking a second pass from the opposite side of the workpiece.

With two alternative bearings, large step

Supplied with alternative bearings to produce a rounding over and two sizes of ovolo moulding.

• The smaller bearing gives a 3.2mm quirk.