DEALER LOGIN
Trend
Login  |  Register
Items 0  |   View order

KNOWLEDGE BASE

In depth information on a wide range of topics.
Routing - Getting Started  

Routing - Getting Started

How to Guides  

How to Guides

Router & Cutter Maintenance  

Router & Cutter Maintenance

Routing Accessories  

Routing Accessories

Tradesman Routing Applications  

Tradesman Routing Applications

Routing Cutter Applications  

Routing Cutter Applications

Routing Jigs & Templates  

Routing Jigs & Templates

Table Routing  

Table Routing

Frequently Asked Questions  

Frequently Asked Questions

Drilling & Trend Snappy  

Drilling & Trend Snappy

Sharpening with Diamond Stones  

Sharpening with Diamond Stones

Sawing  

Sawing

Spindle Tooling  

Spindle Tooling

Timbers & Material Glossary  

Timbers & Material Glossary

 

Routing - Getting Started

 
 
Routing Introduction
Routing Introduction
All you need to know when getting started with routing.
 
Router Cutter Ranges
Router Cutter Ranges
Explains the differences between our router cutter ranges shown.
 
Find the perfect Router for your project
Find the perfect Router for your project
Our guide to help you choose the perfect router and make the best router choice.
 
Cutter Type Selection
Cutter Type Selection
Choosing different types of cutters for different applications.
 
How to setup your Router ready for use.
How to setup your Router ready for use.
How to correctly fit cutters, make cuts and setting the correct speed.
 
Routing Basics Explained
Routing Basics Explained
A helpful guide to the basics of using a router.
 
Cutter Style Selection
Cutter Style Selection
A guide to selecting correct cutters for a wide range of routing applications.
 
Basic Cutter and Collet Maintenance
Basic Cutter and Collet Maintenance
It is essential to regularly maintain your cutters and collets in order to...
 
Health and Safety considerations when Routing
Health and Safety considerations when Routing
Following basic safety instructions will ensure yours & others health & safety.
 
Routing Hints and Tips
Routing Hints and Tips
A selection of useful tips and suggestions when routing.

Routing Basics Explained

Cutter Types Cutter Types Groove forming cutters These require the use of a side-fence, batten, guide bush or other method of guiding the router. To minimise heat...

More

Fitting Cutters Fitting Cutters When fitting the cutter always ensure that at least 3/4 of the shank length is held in the collet. Do not try to grip the cutter by the end of...

More

Holding the Work Holding the Work Traditional G-cramps are now being replaced by ‘quick action’ clamps to hold the workpiece or jig etc in position. They are less likely to impede...

More

Router Cutters Router Cutters Geometry Most cutters have tungsten carbide tips brazed onto a steel body and are designed to cut natural timbers, plywood, MDF and...

More

Safe Routing Procedure Safe Routing Procedure First fit the cutter into the collet of the router and set the depth of cut. Set-up the guiding method and finally check that the workpiece is...

More

Standard Accessories Standard Accessories With your new router you are likely to get several standard accessories. This may include:- Side-fence For routing parallel to any straight edge...

More

https://uk.trustpilot.com/review/trend-uk.com [^]
 
  Aspin Interactive e-commerce