DEALER LOGIN
Trend
Login  |  Register
Items 0  |   View order

KNOWLEDGE BASE

In depth information on a wide range of topics.
Routing - Getting Started  

Routing - Getting Started

How to Guides  

How to Guides

Router & Cutter Maintenance  

Router & Cutter Maintenance

Routing Accessories  

Routing Accessories

Tradesman Routing Applications  

Tradesman Routing Applications

Routing Cutter Applications  

Routing Cutter Applications

Routing Jigs & Templates  

Routing Jigs & Templates

Table Routing  

Table Routing

Frequently Asked Questions  

Frequently Asked Questions

Drilling & Trend Snappy  

Drilling & Trend Snappy

Sharpening with Diamond Stones  

Sharpening with Diamond Stones

Sawing  

Sawing

Spindle Tooling  

Spindle Tooling

Timbers & Material Glossary  

Timbers & Material Glossary

 

Routing - Getting Started

 
 
Routing Introduction
Routing Introduction
All you need to know when getting started with routing.
 
Router Cutter Ranges
Router Cutter Ranges
Explains the differences between our router cutter ranges shown.
 
Find the perfect Router for your project
Find the perfect Router for your project
Our guide to help you choose the perfect router and make the best router choice.
 
Cutter Type Selection
Cutter Type Selection
Choosing different types of cutters for different applications.
 
How to setup your Router ready for use.
How to setup your Router ready for use.
How to correctly fit cutters, make cuts and setting the correct speed.
 
Routing Basics Explained
Routing Basics Explained
A helpful guide to the basics of using a router.
 
Cutter Style Selection
Cutter Style Selection
A guide to selecting correct cutters for a wide range of routing applications.
 
Basic Cutter and Collet Maintenance
Basic Cutter and Collet Maintenance
It is essential to regularly maintain your cutters and collets in order to...
 
Health and Safety considerations when Routing
Health and Safety considerations when Routing
Following basic safety instructions will ensure yours & others health & safety.
 
Routing Hints and Tips
Routing Hints and Tips
A selection of useful tips and suggestions when routing.

Cutter Style Selection

Straight Cutters Straight Cutters Straight cutters are generally used for trimming and cutting straight edges, cutting straight rebates, slots and grooves. For these operations the...

More

Rebate Cutters Rebate Cutters Self guided rebate cutters can be used on straight as well as curved work. Although the width of the rebate is set by the guide bearing diameter,...

More

Ogee Moulding Cutters Ogee Moulding Cutters This is one of the most popular of the traditional decorative moulding cutters. The ogee cutter is suitable for finishing the edges of tables...

More

Rounding Over Cutters Rounding Over Cutters These are generally used to soften the appearance of square edged worktops, window boards and furniture. By lowering the cutter a top step can be...

More

Cove Cutters Cove Cutters Generally used as decorative cutters, cove cutters can be used to rout a decorative edge finish, for fluting, or produce pipe and cable ducts....

More

Dovetail Cutters Dovetail Cutters Although used for cutting housings for shelf ends, unlike straight cutters, the dovetail profile must be cut in one pass only. Always cut the...

More

Chamfer Cutters Chamfer Cutters Chamfers can be run the full length of the workpiece or ‘stopped’ a short distance from the end. For the latter, a stop can be fitted to limit...

More

V-Groove Cutters V-Groove Cutters The main uses of the v-cutter are for decorative grooves, fluting, imitation matchlining on panel materials, and free-hand or template letter...

More

Trimming & Template Profiling Cutters Trimming & Template Profiling Cutters Bearing guided trimming cutters allow veneers and laminates to be trimmed flush with the edge of the base material, leaving a perfect chip free...

More

https://uk.trustpilot.com/review/trend-uk.com [^]
 
  Aspin Interactive e-commerce