• 1 x Routabout Template
• 3 x Spacer Rings
• 1 x Special TCT Router Bit
• 1 x 1-3/16" Euro Style Plastic Guide Bush
• 1 x 1-3/16" Screw-on Style Guide Bush

Access to pipes & cables beneath chipboard floors in seconds. For builders, plumbers & electricians.

• A10 inch diameter opening can be cut and made good in seconds. Designed for use in new or existing 7/8 inch chipboard or similar floors. Cuts only the thickness of the board. No waste, the piece cut out is used to make good the floor.
• All you need is a plunge router (1 HP or above).
• Includes 1/4 inch shank TCT router bit and 1-3/16 inch screw-on style guide bush.
• A Unibase may be required for certain makes and models of router.
• Patent No. GB2238751.