• 4 x Alloy Extrusions
• 4 x Corner Brackets
• 3 x Scales
• 1 x Squaring Butt
• 2 x Length Stops
• 1 x Hex Key

Allows grooves and tenons to be cut using a router.

• Can be used to crosscut boards with a router or circular saw.
• Frame is adjustable to allow narrower or wider grooves to be routed.
• The max. adjustment is 2 3/4 inch depending on the diameter of the router base.
• The edge of the frame can be used as a guide to trim a panel square using a router.
• Two sliding stops to set groove length.
• Squaring butt has the facility to accept a spelch block to allow a full-length groove.
• Fixing screws are included for this purpose. Working length is 15 3/4 inch.
• Use with a router with a guide bush with a minimum 5/16 inch projection fitted.
• Router not included.

4 customer reviews |  Write a review