Group

10/97X1/4TC - Mitrelock cutter

10/97X1/4TC
£111.18
£92.65

Machining of this joint is carried out by routing one piece with the inside face on the table.

  • The matching corner inside face is machined upright against the fence.
  • Make sure that the cutter is centred on the workpiece.
  • The cutter can also be used for a glue joint, for joining lengths together.
  • Ideal for speaker cabinets and drawer construction.
  • Please note.
  • These tools cannot be re-sharpened.
  • Inverted use only.
  • Use on MDF and natural timbers.
D
42 mm
C
12.7 mm
C2
4 mm
A
45 degrees
OL
44.6 mm
Shank Diameter
1/4 inch
Timber thickness min.
8 mm
Timber thickness max.
12 mm

no spare products

Product Questions

Write Your Own Question
Your Question: