Group

18/53X1/4TC - Bearing guided classic cutter

18/53X1/4TC
£71.77
£59.81

Ideal for following templates when panelling and profiling in furniture manufacture.

  • It is advisable that the template is at least 5mm thicker than the cut length of the cutter.
D
22 mm
C
10 mm
B
22 mm
R
3.5 mm
OL
51 mm
Shank Diameter
1/4 inch
Product Image Product Ref Diagram No Description Quantity Required Price for 1
BB22 - Bearing 22mm diameter 8mm bore BB22

Bearings are shielded to prevent penetration of dust and grease packed for life.

  • They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure.
  • Scrape off any resin build-up.
  • Always check the tightness of the fixing screw before using cutter.
£11.11
CIRC/1 - Circlip 8mm CIRC/1

Sprung steel fasteners to hold bearings in position onto grooved shanks.

    £1.45

    Videos

    Bearing Guided Cutter Video

    Our video guide on how to use your bearing guided cutters, the different types and applications.

    Product Questions

    Write Your Own Question
    Your Question: