Group

18/56X1/2TC - Bearing guided classic panel cutter

18/56X1/2TC
£100.02
£83.35

Shank mounted bearing follows template mounted on board surface.

  • It is advisable that the template is at least 5mm thicker than the cutter.
D
35 mm
C
9/16 inch
C
14.3 mm
B
35 mm
R
6.3 mm
R2
10.3 mm
OL
68 mm
Shank Diameter
1/2 inch
Product Image Product Ref Diagram No Description Quantity Required Price for 1
Out of Stock B35G - Bearing 35mm diameter 15mm bore B35G

Bearings are shielded to prevent penetration of dust and grease packed for life.

  • They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure.
  • Scrape off any resin build-up.
  • Always check the tightness of the fixing screw before using cutter.
£14.96
CIRC/2 - Circlip 1/2 inch CIRC/2

Sprung steel fasteners to hold bearings in position onto grooved shanks.

    £1.45

    Videos

    Bearing Guided Cutter Video

    Our video guide on how to use your bearing guided cutters, the different types and applications.

    Product Questions

    Write Your Own Question
    Your Question: