Group

25/5X8MMTC - Octacut

25/5X8MMTC
Out of Stock
£71.29
£59.41

Delivery Info Out of Stock

These 'Eight in One' Cutters sets have been designed to cut eight different profiles.

  • Can be used portably or in a router table.
  • Use B2 for a 1.6mm quirk and B3 for a round over.
D
34.9 mm
C
1 inch
C
25.5 mm
B
9.5 mm
B2
12.7 mm
B3
16 mm
R
9.5 mm
OL
80 mm
Shank Diameter
8 mm

Rule joint

Timber thickness min.
11 mm
Timber thickness max.
15 mm
Product Image Product Ref Diagram No Description Quantity Required Price for 1
B127A - Bearing 1/2" diameter 3/16" bore B127A 006

Trend Router Cutter Bearing - for 3/16in bottom mounting

  • High quality ball bearing for free running against an edge to prevent heat build up.
  • 3/16in inside diameter for use on bottom mounted trimmer and profiling cutters.
  • 1/2in outside diameter for matched fit to trimming and templating cutters.
  • Bearings are grease packed for maximum efficiency and lifespan.
  • Shielding to both sides of the bearing prevents penetration of dust for maximum performance.
1 £5.18
B16A - Bearing 5/8" diameter 3/16" bore B16A 007

Bearings are shielded to prevent penetration of dust and grease packed for life.

  • They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure.
  • Scrape off any resin build-up.
  • Always check the tightness of the fixing screw before using cutter.
1 £6.62
B16D - Bearing 5/8" diameter 3/8" bore B16D 003

Bearings are shielded to prevent penetration of dust and grease packed for life.

  • They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure.
  • Scrape off any resin build-up.
  • Always check the tightness of the fixing screw before using cutter.
1 £11.92
B95A - Bearing 3/8" diameter 3/16" bore B95A 005

Bearings are shielded to prevent penetration of dust and grease packed for life.

  • They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure.
  • Scrape off any resin build-up.
  • Always check the tightness of the fixing screw before using cutter.
1 £6.48
COLL/38A - Collar pack COLL/38A 002

Collar Packs are used for cutters with shank mounted bearings.

  • Packs include one collar, grub screw and hex key.
1 £2.51
SP-C - Spare part pack SP-C 009

Spare part packs make ordering spares easier.

  • Packs include, hex key (if required), screw, washer and shield (if required).
1 £2.80

Videos

Bearing Guided Cutter Video

Our video guide on how to use your bearing guided cutters, the different types and applications.

Product Questions

Write Your Own Question
Your Question: