Group

Voting on our T18S Competition closes at midnight tonight - Have you voted yet? 

Voting on our T18S Competition closes at midnight tonight - Have you voted yet? 


S64/30LHX1/4STC - Aluminium Guided spiral 6.3x12.7 downcut

S64/30LHX1/4STC
£96.70
£80.58

Solid carbide bearing guided router cutters for trimming aluminium sheet to a template.

  • Specially designed carbide with two flutes for clean finish.
  • Maximum trim of 3mm thick aluminium.
  • Double bearing guide on nose.
  • Recommended that a lubricant is used to reduce tool breakage.
  • Downcut for better clamping when machining small workpieces and improved finish on the tops of the board.
  • Eject chips up or down depending on tool used.
  • Material must be securely clamped.
D1
1/4 inches
D1
6.3 mm
C
1/2 inches
C
12.7 mm
OL
72 mm
Recommended speed
12,000-18,000 rpm
Product Image Product Ref Diagram No Description Quantity Required Price for 1
B63B - Bearing 1/4" diameter 1/8" bore B63B

Bearings are shielded to prevent penetration of dust and grease packed for life.

  • They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure.
  • Scrape off any resin build-up.
  • Always check the tightness of the fixing screw before using cutter.
£8.22

Videos

Straight Router Cutters Video

Our video guide to using straight router cutters which highlights the different types, grades and applications.

Product Questions

Write Your Own Question
Your Question: