The Trend 700mm Square Kitchen Worktop Jig - KWJ700s
The new Trend KWJ700S Worktop Jig cuts two types of worktop joint to achieve standard postformed joints, or the current on-trend narrower joint favoured on the square edged or smaller radiused postformed tops.
The Worktop Jig Uses a set of indexing pins to site it accurately against the worktop, it is fast to set up and use, and a completed joint can be cut in 15 minutes including setup and positioning.
Additionally, all the relevant setup positions are etched into the surface of the jig for foolproof setup making the KWJ700S a very intuitive and easy jig to get to grips with whether you are a competent amateur or seasoned tradesman.
With jig setup pin positions at 250mm, 300mm. 400mm, 500mm, 550mm, 600mm, 616mm, 650mm and 700mm it covers a comprehensive range of common worktop widths for applications covering bathroom, utility, washroom and kitchen worktop installations for maximum diversity.
For either style of joint the pins are set into the relevant holes that match the worktop width, with a twin holed recess covering both widths of joint to remove either 10mm or 23mm material from the worktop edge to form the perfect joint every time.
Made from 12mm thick high pressure laminate for durable, repeatable accuracy the jig covers all the bases when it comes to worktop fitting with additional setups for 45 degree joints, 40mm, 100mm and 200mm radii corners and a 45 degree corner cut plus a 35mm Euro Hinge recess setting, making the Trend KWJ700S the speedy, pinpoint accurate, all-round solution for contemporary and traditional worktop installations.
If you have any questions about Trend products, please do not hesitate to contact our dedicated in-house customer service or technical team.