DEALER LOGIN
Trend
Login  |  Register
Items 0  |   View order

Products

Applications

Drilling

 
90 Degree Countersinks Without Drill Bit

90 Degree Countersinks Without Drill Bit

These countersinks, produced from the best grade carbon steel, leaves a clean cut finish by virtue of their multi-tooth deep ground gullets.

  • Fits metric drills from 3mm to 12mm inclusive.
  • Not suitable for abrasive materials or metal.
  • Drill bit not included.
90 Degree Countersinks Without Drill Bit90 Degree Countersinks Without Drill Bit
Product Ref. D
mm
D2
mm
OL
mm
List Price  
620/9WS 20 9 25 £ 25,44 This product has been discontinued but is available while stocks last.
Long Series

Long Series

Saw Tooth Forstner bits are made from high grade Carbon Steel and meticulously heat treated.

  • They cut fast, with the grain or across it.
  • They can drill overlapping holes in any direction and are chosen for exacting and delicate work, such as scroll and scolloping operations.
  • Not for use with routers.
  • A fast feed rate is recommended.
Long SeriesLong Series
Product Ref. D
mm
D
inch
OL
inch
Shank
Dia.
List Price  
1306/118WS 28.5 1 1/8 5 1/4 1/2 £ 42,59 This product has been discontinued but is available while stocks last.
Short Series

Short Series

Saw Tooth Forstner bits are made from high grade Carbon Steel and meticulously heat treated.

  • They cut fast, with the grain or across it.
  • They can drill overlapping holes in any direction and are chosen for exacting and delicate work, such as scroll and scolloping operations.
  • Not for use with routers.
  • A fast feed rate is recommended.
Short SeriesShort Series
Product Ref. D
mm
D
inch
C
mm
OL
mm
OL
inch
Shank
Dia.
List Price  
1307/78WS 22.2 7/8 57.15 88.9 3 1/2 3/8 £ 31,42 This product has been discontinued but is available while stocks last.
1307/118WS 28.5 1 1/8 57.15 88.9 3 1/2 3/8 £ 41,63 This product has been discontinued but is available while stocks last.
2 Wings & Centre Point

2 Wings & Centre Point

These machine bits are typically used by kitchen furniture manufacturers for recessing circular hinges. This economy range is supplied without scribers and are used for recessing holes in melamine covered chipboard.

  • Use with pillar drills only.
2 Wings & Centre Point2 Wings & Centre Point2 Wings & Centre Point
Product Ref. D
mm
OL
mm
Type or Grade Shank
Dia.
List Price  
T420/26X8MMTC 26 57 TCT 8 mm £ 16,12 This product has been discontinued but is available while stocks last.
T420/30X8MMTC 30 57 TCT 8 mm £ 16,12 This product has been discontinued but is available while stocks last.
2 Wings, 2 Scribers  & Centre Point

2 Wings, 2 Scribers & Centre Point

These machine bits are typically used by kitchen furniture manufacturers for recessing circular hinges. This type with scribers is used on veneered and wood finishes.

  • Use with pillar drills only.
2 Wings, 2 Scribers  & Centre Point2 Wings, 2 Scribers  & Centre Point2 Wings, 2 Scribers  & Centre Point
Product Ref. D
mm
OL
mm
Type or Grade Shank
Dia.
List Price  
104/15X3/8TC 15 60 TCT 3/8 £ 66,88 This product has been discontinued but is available while stocks last.
2 Wings, no Scribers  & Centre Point

2 Wings, no Scribers & Centre Point

These machine bits are typically used by kitchen furniture manufacturers for recessing circular hinges. This type without scribers are for laminate covered boards.

2 Wings, no Scribers  & Centre Point2 Wings, no Scribers  & Centre Point
Product Ref. D
mm
OL
mm
Type or Grade Shank
Dia.
List Price  
421/15X1/4TC 15 60 TCT 1/4 £ 78,06 This product has been discontinued but is available while stocks last.
421/20X3/8TC 20 60 TCT 3/8 £ 51,04 This product has been discontinued but is available while stocks last.
Lip & Spur

Lip & Spur

These machine bits have two wings, two scribers and a centre point. Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density. The scribe gives a very clean entrance hole. Not for use on hard dense materials such as laminate covered board, phenolic Tufnol, Wareite and GRP. For such...

Read more
Lip & SpurLip & Spur
Product Ref. D
mm
OL
mm
Type or Grade Shank
Dia.
List Price  
1004/10TC 10 90 TCT 10 £ 31,61 This product has been discontinued but is available while stocks last.
1004/18TC 18 90 TCT 10 £ 49,50 This product has been discontinued but is available while stocks last.
1004/29TC 29 90 TCT 10 £ 66,88 This product has been discontinued but is available while stocks last.
1004/30TC 30 90 TCT 10 £ 53,50 This product has been discontinued but is available while stocks last.
1004/31TC 31 90 TCT 10 £ 53,50 This product has been discontinued but is available while stocks last.
1004/34TC 34 90 TCT 10 £ 54,28 This product has been discontinued but is available while stocks last.
Clean cut plug makers for timber

Clean cut plug makers for timber

Precision made plug makers for use on natural timber, exactly matching the holes produced by the Saw Tooth Forstners groups 1306 & 1307.

  • These have four to six wings to ensure a clean cut. Use a slow, constant feed rate ensuring timber is clamped to bed of drilling machine.
  • Do not use these tools on abrasive timber or hard plastics or...
Read more
Clean cut plug makers for timberClean cut plug makers for timberClean cut plug makers for timber
Product Ref. D
mm
D
inch
C
mm
OL
mm
Shank
Dia.
List Price  
2214/112WS 38.1 1 1/2 96.52 160.2 1/2 £ 148,38 This product has been discontinued but is available while stocks last.
2214/134WS 44.5 1 3/4 96.52 160.2 1/2 £ 152,21 This product has been discontinued but is available while stocks last.
2214/2WS 50.8 2 96.52 160.2 1/2 £ 184,06 This product has been discontinued but is available while stocks last.

Key

This product has been discontinued but is available while stocks last. This product has been discontinued but is available while stocks last.
https://uk.trustpilot.com/review/trend-uk.com [^]
 
  Aspin Interactive e-commerce