DEALER LOGIN
Trend
Login  |  Register
Items 0  |   View order

Products

Applications

Slotters

 
Biscuit Jointer Set

Biscuit Jointer Set

Trend Craft Pro 1/4in shank bearing guided biscuit cutter - 37.2mm diameter Two Flute Carbide tips.

  • Two flute carbide TCT tips for cutting biscuit slots in timber and timber based materials.
  • Supplied with three interchangeable bearings covering biscuit sizes 0, 10 and 20 covering furniture and joinery applications.
  • 1/4in shank , ideal for...
Read more
Biscuit Jointer SetBiscuit Jointer SetBiscuit Jointer Set
Product Ref. D
mm
C
mm
OL
mm
B
mm
Shank
Dia.
List Price  
C152X1/4TC 37.2 4 63.5 12.7 1/4 £ 62,53 More
C152X8MMTC 37.2 4 63.5 12.7 8 mm £ 62,53 More
C152X12MMTC 37.2 4 64 12.7 12 mm £ 62,53 More
C152X1/2TC 37.2 4 64 12.7 1/2 £ 62,53 More
Keyhole

Keyhole

For picture hanging flush to the wall.

  • Plunge cutter & move forward, then retract out from entry hole.
  • A template is recommended.
  • For No8 & No10 screw heads.
  • Not suitable for grooving applications.
KeyholeKeyholeKeyhole
Product Ref. D
mm
D
inch
D2
mm
C
mm
C
inch
OL
mm
Shank
Dia.
List Price  
C120X1/4TC 9.5 3/8 4.5 4.5 11/64 53 1/4 £ 32,35 More
Matchlining

Matchlining

A complete cutter set for producing matchlining.

  • Jointing parts are interchanged on the arbor to change the mode of the cutter.
  • Set Ref. C255 can be converted to Ref. C256, and vice-versa, by purchasing the respective groover.
MatchliningMatchliningMatchlining
Product Ref. D
mm
D2
mm
C
mm
OL
mm
B
mm
A
degrees
Shank
Dia.
List Price  
C256X1/2TC 34 11 81 34 45 1/2 £ 143,15 More
C255X1/2TC 47 11 81 34 45 1/2 £ 143,15 More
Slotting Cutters

Slotting Cutters

These two wing Tungsten Carbide Tipped slotting cutters are ideal for grooving and rebating operations. A 12.7mm diameter bearing is supplied with every cutter giving a 9.5mm groove depth. Depth of cut can be changed by purchasing alternative bearing sizes. Easy to set-up and use.

  • Hex key is supplied.
  • N.B. The grooving section of this...
Read more
Slotting CuttersSlotting CuttersSlotting Cutters
Product Ref. D
mm
D
inch
C
mm
C
inch
OL
mm
B
mm
E
mm
Shank
Dia.
List Price  
C143AX8MMTC 31.8 1 1/4 3 62 12.7 9.5 8 mm £ 36,52 More
C143X1/4TC 31.8 1 1/4 3.2 1/8 62.5 12.7 9.5 1/4 £ 36,52 More
C144AX8MMTC 31.8 1 1/4 4 5/32 63 12.7 9.5 8 mm £ 36,52 More
C144X1/4TC 31.8 1 1/4 4.7 3/16 63.5 12.7 9.5 1/4 £ 36,52 More
C145AX8MMTC 31.8 1 1/4 6 15/64 65 12.7 9.5 8 mm £ 39,71 More
C145X1/4TC 31.8 1 1/4 6.3 1/4 65 12.7 9.5 1/4 £ 39,71 More
C146X1/4TC 31.8 1 1/4 8 5/16 67 12.7 9.5 1/4 £ 39,71 More
C147X1/4TC 31.8 1 1/4 9.5 3/8 68 12.7 9.5 1/4 £ 41,69 More
C148X1/4TC 31.8 1 1/4 10 25/64 68.5 12.7 9.5 1/4 £ 41,69 More
C143BX1/4TC 36 2 58 12.7 9.5 1/4 £ 33,42 More
T Slotters & Slat Wall

T Slotters & Slat Wall

A 'T' slot cutters for clamping and hanging applications.

  • Relief cut required.
  • MEC mechanical feed only.
T Slotters & Slat WallT Slotters & Slat WallT Slotters & Slat Wall
Product Ref. D
mm
D2
mm
C
mm
OL
mm
R
mm
Shank
Dia.
List Price  
C120AX1/2TC 30 10.5 7 55.5 3 1/2 £ 79,49 More
Tongue & Groover

Tongue & Groover

A one piece set. Parts are inter-changed on the arbor to alter the set-up. For use with router table only.

Tongue & GrooverTongue & GrooverTongue & Groover
Product Ref. D
mm
C
mm
OL
mm
B
mm
Shank
Dia.
List Price  
C158X1/4TC 41 6.35 75 22 1/4 £ 65,71 More
C158X8MMTC 41 6.35 75 22 8 mm £ 65,71 More
C158X1/2TC 41 6.35 75 22 1/2 £ 65,71 More
https://uk.trustpilot.com/review/trend-uk.com [^]
 
  Aspin Interactive e-commerce