DEALER LOGIN
Trend
Login  |  Register
Items 0  |   View order

  With the jig correctly positioned, it is secured to the door using the supplied bradawls
The router is set up with a suitable 12mm cutter such as Refs. 3/8LX1/4TC, TR12X1/4TC or C019AX1/4TC
Fit the supplied 16mm guide bush to your router. You may need to use a Trend Unibase Ref. UNIBASE if the guide bush doesnŐt fit directly to your router
Position the router onto the jig and plunge the cutter until it touches the surface of the door edge and lock the setting

Use the hinge leaf as a gauge to set the routing depth using the turret and depth post

Each hinge position is routed to remove all of the waste

     
RELATED PRODUCTS
Two flute cutter 12mm diameter
Two flute cutter 12mm diameter
TR12X1/4TC
£ 40,69
Trend Craft Pro 12mm x 19mm 1/4in shank router cutter bit for use with Trend Hinge Jigs
Trend Craft Pro 12mm x 19mm 1/4in shank router cutter bit for use with Trend Hinge Jigs
C019AX1/4TC
£ 30,37
Two flute cutter 12mm diameter
Two flute cutter 12mm diameter
3/8LX1/4TC
£ 45,46
 
RELATED VIDEOS
Trend Unibase Video
Trend Unibase Video
 
RELATED TEST REVIEWS
Guide Bush Set Test
Guide Bush Set Test
 
RELATED INSTRUCTIONS
T10 & T11 - Routing Worktops Accurately
T10 & T11 - Routing Worktops Accurately
UNIBASE Hole Position Guide
UNIBASE Hole Position Guide
 
RELATED DOWNLOADS
Power Tool Safety Sheet EN60745-1
Power Tool Safety Sheet EN60745-1
Cutting Tools & Routing Safety Sheet
Cutting Tools & Routing Safety Sheet
 
< Back to Index Previous   Previous   |  Next   Next
https://uk.trustpilot.com/review/trend-uk.com [^]
 
  Aspin Interactive e-commerce