FTS/KIT MK1 Retro fit tune up kit

• Non slip mat reduces movement between FTS and worksurface
• Centering clip to position chisels and narrower blades centrally, increasing the length of sharpening stroke and imporves stability and balance
• Ergonomic carriage caps improve comfort especially during prolonged use

Simple to use Sharpener Guide for consistent edges on Chisels and plane irons

• Four Honing Angles 25°, 27.5°, 30° & 32.5° for increased honing and edge reshaping options
• Removeable Centring Clip positions narrow blades and chisels centrally to maximise the sharpening stroke for increased efficiency
• Non-slip nitrile rubber feet help keep the Fast Track securely in place on any surface
• Ergonomic Carriage Caps For increased comfort over longer periods of sharpening
• Laterally sharpened edges are more durable & less prone to fracturing
• Consistent sharpening angle promotes tool life
• Creates a perfect square edge with a flat ground finish
• Magnetic Stone Holders keeps each stone securely in place for safe, easy operation

Mini strop accessory for use with the Fasttrack sharpener.

• Retro fit design self-adhesive backed.
• Strop is placed under the base of the Fasttrack.
• For use with honing paste to give a mirror finish on chisels and plane blades.

Replacement finishing stone for the Fasttrack sharpening system.

• Monycrystalline diamond with unique Diamond Cross relief pattern which gives optimal abrasion rates to maximise sharpening efficiency and reduces clogging.
• Diamonds are held by Nickel plating to a steel substrate, with ABS plastic base.

Portable easy to use hand held knife sharpener giving guaranteed razor fine edges every time.

• Simple and safe to use, can be used by total beginner to the most discerning of professionals.
• Interchangeable grade of diamond with on board leather strop.
• In freehand use the sharpener adapts the same sharpening action as a chefs steel, or it can be used on a flat surface, eg chopping board.
• Sharpens single and double bevelled blades.
• Stone will remove small nicks and damage.
• Included angle of 30 degree.
• Work through a range of accessory stones to gain the finest of edges.
• Twin magnetic guides hold the blade at the correct sharpenning angle.
• Large sharpening surface contact area enables blade pre-preparation, allowing for quick re-honing which extends the life of the edge and the knife.
• Diamond stones can be mounted in four different positions to maximise stone life.
• Tough GFN plastic construction.
• Nitrile feet to grip the work surface.
• Patent applied for.

Replacement preparation stone for the Fasttrack sharpening system.

• Monycrystalline diamond with unique Diamond Cross relief pattern which gives optimal abrasion rates to maximise sharpening efficiency and reduces clogging.
• Diamonds are held by Nickel plating to a steel substrate, with ABS plastic base.

Roughing taper stone for the Fasttrack sharpening system.

• 2.5 degree taper to give intermediate angles of 22.5/27.5 degree and 27.5/32.5 degree when used with the Fasttrack sharpener, or Fastrack knife sharpener.
• Monycrystalline diamond with unique Diamond Cross relief pattern which gives optimal abrasion rates to maximise sharpening efficiency and reduces clogging.
• Diamonds are held by Nickel plating to a steel substrate, with ABS plastic base.

Roughing taper stone for the Fasttrack sharpening system.

• 2.5 degree taper to give intermediate angles of 22.5/27.5 degree and 27.5/32.5 degree when used with the Fasttrack sharpener, or Fastrack knife sharpener.
• Monycrystalline diamond with unique Diamond Cross relief pattern which gives optimal abrasion rates to maximise sharpening efficiency and reduces clogging.
• Diamonds are held by Nickel plating to a steel substrate, with ABS plastic base.

Roughing taper stone for the Fasttrack sharpening system.

• 2.5 degree taper to give intermediate angles of 22.5/27.5 degree and 27.5/32.5 degree when used with the Fasttrack sharpener, or Fastrack knife sharpener.
• Monycrystalline diamond with unique Diamond Cross relief pattern which gives optimal abrasion rates to maximise sharpening efficiency and reduces clogging.
• Diamonds are held by Nickel plating to a steel substrate, with ABS plastic base.

Roughing taper stone for the Fasttrack sharpening system.

• 2.5 degree taper to give intermediate angles of 22.5/27.5 degree and 27.5/32.5 degree when used with the Fasttrack sharpener, or Fastrack knife sharpener.
• Monycrystalline diamond with unique Diamond Cross relief pattern which gives optimal abrasion rates to maximise sharpening efficiency and reduces clogging.
• Diamonds are held by Nickel plating to a steel substrate, with ABS plastic base.

Roughing taper stone for the Fasttrack sharpening system.

• 2.5 degree taper to give intermediate angles of 22.5/27.5 degree and 27.5/32.5 degree when used with the Fasttrack sharpener, or Fastrack knife sharpener.
• Monycrystalline diamond with unique Diamond Cross relief pattern which gives optimal abrasion rates to maximise sharpening efficiency and reduces clogging.
• Diamonds are held by Nickel plating to a steel substrate, with ABS plastic base.

Roughing stone for the Fasttrack sharpening system.

• Monycrystalline diamond with unique Diamond Cross relief pattern which gives optimal abrasion rates to maximise sharpening efficiency and reduces clogging.
• Diamonds are held by Nickel plating to a steel substrate, with ABS plastic base.

Super fine finish stone for the Fasttrack sharpening system.

• Monycrystalline diamond with unique Diamond Cross relief pattern which gives optimal abrasion rates to maximise sharpening efficiency and reduces clogging.
• Diamonds are held by Nickel plating to a steel substrate, with ABS plastic base.

Deburring plate super extra fine finish stone for the Fasttrack sharpening system.

• Self adhesive backed for easy fit into recess in Fasttrack base.
• For quick removal of a burr on chisels and plane irons.
• Pull chisel or plane iron backwards when removing from Fast Track to deburr cutting edge.
• Will retro fit to existing Fasttracks.
• Deburr plate could also be stuck on a user made backing board to hone other tools in the workshop.

Chisel edge guards to protect from injury and damage.

• Sizes 1/4 inch, 1/2 inch, 3/4 inch, 1 inch, 1-1/4 inch and 1-1/2 inch.
• Two of each size.
• Pack of 12.

Tough fabric storage case for the FTS/KIT & FTS/KIT/MK2.

• With pockets to accept three accessory stones.
• Hook & Loop flap to keep contents secure.
• Hanging loop/carry strap.
• Keeps the accessories including cleaning block and non-slip mat together with sharpener.