For shaping GRP fine cut end mill STC |
 |
|
Solid Carbide rasp/burr.
- Coarse cut.
- For grinding, carving and shaping of glass reinforced plastics (GRP).
- With twin roller bearings, is ideal for following a template bu.
- Not suitable for plunge cutting.
- Use at speed 10000 -30000 RPM.
Solid Carbide rasp/burr.
- Coarse cut.
- For grinding, carving and shaping of glass reinforced plastics (GRP).
- With twin roller bearings, is ideal for following a template bu.
- Not suitable for plunge cutting.
- Use at speed 10000 -30000 RPM.
|
