DEALER LOGIN
Trend
Login  |  Register
Items 0  |   View order

Find the perfect Router for your project

Our guide to help you find the perfect router.
Find the perfect Router for your project
  Our guide to help you choose the perfect router and make the best router choice.
     
RELATED PRODUCTS
1000W 1/4" Variable Speed Router 115V - UK sale only
1000W 1/4" Variable Speed Router 115V - UK sale only
T5ELB
£ 199.00 +VAT
850W 1/4" Variable Speed Router 115V - UK sale only
850W 1/4" Variable Speed Router 115V - UK sale only
T4ELK
£ 112.27 +VAT
2000W 1/2" Variable Speed Router 230V - UK sale only
2000W 1/2" Variable Speed Router 230V - UK sale only
T10EK
£ 357.41 +VAT
 
RELATED VIDEOS
T10 & T11 Guide Bush Line Up System
T10 & T11 Guide Bush Line Up System
T10 & T11 Router Test Review
T10 & T11 Router Test Review
 
RELATED TEST REVIEWS
T10 Router Test
T10 Router Test
T10 Router Test
T10 Router Test
 
RELATED INSTRUCTIONS
T10E & T11E Routers Instructions
T10E & T11E Routers Instructions
T4E Router Instructions
T4E Router Instructions
T5E & T5E/MK2 V2 Router Instructions
T5E & T5E/MK2 V2 Router Instructions
 
RELATED DOWNLOADS
Power Tool Safety Sheet EN60745-1
Power Tool Safety Sheet EN60745-1
 

Introduction to Routing

Introduction to Routing
  Routers are rated on their input wattage, which ranges from 400 watts for a basic DIY router to around 3000 watts for a heavy-duty industrial machine. The maximum speed at which these machines operate varies between 10,000 and 32,000 rpm. The high speed is an important factor in routing, as it is this that is relied upon to produce the quality and precision of the finish, rather than out and out power, as would be the case with stationary machines with large heavy motors. Because of this you will find that many of the higher-powered routers actually run at lower speeds, the lower powered models needing this high-speed factor to compensate for the lack of power. It is also worth remembering that the power output from any power tool isn’t the same as its power input. The output often being as little as 55 to 65 per cent of the input.
The standard and quality of manufacture, and price paid, will be reflected in the efficiency with which the router can utilise the input power, and how much is wasted in transmission. The price will also reflect the quality and precision of standard accessories such as side fences and fine height adjusters supplied with the tool as well as the tool itself.
For the beginner wishing to attempt a range of household projects, such as simple furniture construction, a router of less than 1000 watts will limit the type of work you can undertake and the size of cutters you can use.
A lower wattage router will also slow you down because the amount of material you can actually remove during each cut will be limited, as will the speed you can feed the router into the material.
There two main types of router, the plunge router and a fixed base router. The plunge router allows mortise slots to be routed quickly and easily as the motor head can plunge in relation to the base. A fixed base router uses a rotating body to alter the depth, which can make routing of a mortise slots quite difficult. Another factor to consider is that on fixed base routers the cutter does not quickly retract into the base for safety. Fixed base routers are mainly only sold in North America. There are few combination routers that have both a plunge base and fixed base.
Introduction to Routing
  The user needs to decide what the plunge router will mainly be used for, as this will dictate whether a 1/4-inch or 1/2-inch collet router is required. 1/4-inch routers are smaller, lighter and run at higher speeds, there are also light duty and medium duty models available. 1/2-inch routers will be heavier and more powerful and can be used for a variety of heavier duty applications.
A variable speed 1/2-inch router is best suited for router table use as it allows larger panel cutters to be used. A heavy-duty router designed for router table use is the Trend 2000 watt T11E router that has above and below the table fine height adjustment, which makes cutter height adjustment very easy. The router also has fittings for quick fitting and release from a router table such as the Trend Professional Router Table or CraftPro router table.

If router is to be used on site it is also worth considering if the tool is supplied in a sturdy kit box/storage case, as this will protect the tool, and keep the standard accessories together.
It is also worth noting that the router voltage will need to be confirmed, routers can be supplied in 240-volt and 115-volt. 115-volt is used for building site use. 115-volt machines are plugged into a generator or transformer, the lower voltage offer better safety to the user in case of contact with live parts.
Introduction to Routing
  A 1/4-inch medium duty plunge router is ideal when used with a door-hanging jig, as it is lighter, an example is the Trend 1000 watt T5E router.
Introduction to Routing
  If a router is being used to rout kitchen worktop joints with a worktop jig the machine must have a 1/2-inch collet capacity, such as the 2000 watt Trend T10E. The guide bush to cutter accuracy must also be considered when a perfect joint is required; if the guide bush is not concentric the resulting cut will be offset.
Introduction to Routing
  If a router is to be used for carving, it is worth considering using a router that has a removable base such as the Trend 850 watt T4E router.

All routers used must meet the current European standards for power tool safety.
     
RELATED PRODUCTS
2000W 1/2" Variable Speed Router 230V - UK sale only
2000W 1/2" Variable Speed Router 230V - UK sale only
T10EK
£ 357.41 +VAT
1000W 1/4" Variable Speed Router 115V - UK sale only
1000W 1/4" Variable Speed Router 115V - UK sale only
T5ELB
£ 199.00 +VAT
Trend T11 110volt 1/2in collet Router - powerful 2000 watt motor and user friendly adjustments for high end performance in hand
Trend T11 110volt 1/2in collet Router - powerful 2000 watt motor and user friendly adjustments for high end performance in hand
T11ELK
£ 411.63 +VAT
 
RELATED VIDEOS
Quick Tip - How to Trim the Bottom Edge of a Door
Quick Tip - How to Trim the Bottom Edge of a Door
 
RELATED TEST REVIEWS
T11 Router Test
T11 Router Test
T11 Router Test
T11 Router Test
 
RELATED INSTRUCTIONS
T10 & T11 - Routing Worktops Accurately
T10 & T11 - Routing Worktops Accurately
 

Top Vent & Ventilation Intake Slots

Top Vent & Ventilation Intake Slots
  Air is pulled into the ventilation intake slots to cool the motor and bearings. These slots (or grilles) should be kept clear while the router is running to maintain a flow of air.
Always ensure that chips and other waste are kept away to prevent them being sucked into the router.

Top Vent & Ventilation Intake Slots
  The top vent guards and protects the top bearing and armature commutator but, if separate from the body moulding, can be occasionally removed to clear dust and inspect or change the carbon brushes.
     

Armature, Field Coil, Bearings & Carbons

Armature, Field Coil, Bearings & Carbons
  The armature is the rotating coil of the electric motor, which is wound on the motor spindle. The spindle is machined to take the collet and nut to hold the cutter. Some routers have a deeper hole in the armature, which allows longer cutters to be inserted.

Armature, Field Coil, Bearings & Carbons
  The field coil is the stationary electric coil that creates the opposing magnetic field to cause the armature to rotate.

Armature, Field Coil, Bearings & Carbons
  The spindle is mounted in a pair of bearing races to help it run smoothly. They are carefully aligned and firmly seated in the motor housing. Sealed bearings are packed with grease and (if the tool is not abused) should require no maintenance. Although they should have a life expectancy of at least 100 hours running time. It is worth checking them regularly for play and, if necessary, replacing them.
Armature, Field Coil, Bearings & Carbons
  Two carbon brushes are fitted which run against the commutator under light spring pressure. Excess sparking is usually an indication that the brushes have worn and need replacing. Please note carbon brush motors should only be run 20 minutes in every hour.
     

Plunge Columns, Plunge Lock & Handles

Plunge Columns,  Plunge Lock & Handles
  The plunge columns allow the router to plunge accurately down to enter the cutter into the work at 90 degrees. Return springs lift the motor housing to ensure that the cutter is retracted from the cut when the operation is complete. These columns should be kept clean and lightly oiled to ensure a smooth plunge action. Routers with a longer plunge, such as Trend’s T10 or T11, will allow the user to achieve greater depth (up to 80 mm), particularly useful when routing deep mortises.
Plunge Columns,  Plunge Lock & Handles
  The plunge lock is used to lock the router body at the required height on the plunge columns, to set the depth of the exposed cutter (i.e. the depth of cut) beneath the base plate. The Trend T5E plunge is controlled by twisting one of the handles, and makes plunge lock control very easy. Other routers including the Trend T4E, T10E & T11E use a plunge lever to release plunge.
Plunge Columns,  Plunge Lock & Handles
  The handles are used to control the motion of the router, and aid with plunging. Trend routers are designed with the customer in mind and all have ergonomic, and easy to grip handles for ease of use.
     

Depth Stop, Scale & Fine Height Adjuster

Depth Stop, Scale & Fine Height Adjuster
  The depth stop is operated either manually or by a ratchet/knob, this allows the plunge depth to be pre-set to the required depth of cut. A good design of adjustable depth stop is essential for larger routers being used for jobs such as routing worktops and lock recesses, where the depth will need to be adjusted several times to complete the cut. A rotating turret stop with adjustable height studs is also useful when cutter depth changes are required.
Depth Stop, Scale & Fine Height Adjuster
  The depth scale is generally graduated in millimetres, this allows fine adjustment of the cutting depth without having to measure the exposed cutter length.
Depth Stop, Scale & Fine Height Adjuster
  Most routers have a turret stop of some design. Be it a standard 3-stage turret stop, or multi-staged version, it allows the depth of cut to be quickly re-set to facilitate cutting in steps. This is to avoid overloading the router or burning the cutter. With low powered routers the cutting depth on each pass should be no more than 3 to 6mm and must never exceed the cutter diameter. Using the more powerful routers, a deeper cut can be made on each pass but again; shallow passes are recommended to produce the best results.
Depth Stop, Scale & Fine Height Adjuster
  A fine height adjuster accessory is one of the most useful accessories for a router. The adjuster for the T5 allows for fine cutter height adjustment when used on a dovetail jig or a router table. The fine height adjuster is fitted to the tallest stud on the turret stop while the router is plunged down. Some routers, such as the T10E, have what is called an adjustable return stop and nut fitted onto a stud that is connected to the router base plate. The fine height adjuster is sometimes fitted in place of the nut on the stud.
Depth Stop, Scale & Fine Height Adjuster
  The Trend T11E router is supplied with a ‘Quick Raiser’ fine height adjuster so that when the router is fitted in a router table, the router height can be adjusted from above or below the table surface. This makes table routing much easier. One revolution of the handle equals 1.5mm of height adjustment.
     

Switch & Variable Speed Control

Switch & Variable Speed Control
  The switch is usually found near (or incorporated into) one of the handles. Some models for example the Trend T5EK/MK2 have what is called a safety or dead mans switch. This is a switch which has to be held on during the routing operation, and once released the motor is switched off.
Switch & Variable Speed Control
  The electronic variable speed control is used to set the operating speed to accommodate the use of large diameter cutters, which should be used at lower speeds. Higher quality routers are fitted with full wave electronics to maintain a steady and smooth power supply throughout the speed range, monitor the load on the cutter to keep the speed constant and eliminate the harsh kick common to high speed motors on start up (soft start).
Switch & Variable Speed Control
  Trend T10 speed range.
     

Collet, Collet Nut & Spindle Lock

Collet, Collet Nut & Spindle Lock
  The collet is designed to centre the cutter in line with the axis of the motor spindle. If the cutter is out of line, it will cut erratically and vibrate the machine, potentially causing damage to cutter and work piece. The collet lock nut is tightened to squeeze the collet and grip the cutter shank. Trend use one-piece multi-slit collets in most of their routers, which provide maximum grip on the shank surface.
Collet, Collet Nut & Spindle Lock
  One piece multi-slit collets require the collet to be clipped into the collet nut.
Collet, Collet Nut & Spindle Lock
  On early routers the collet lock nut was tightened using two spanners, later models have a spindle lock eliminating the need for one of the spanners and making it easier to tighten the nut in the confined space between the plunge columns. It is also advisable to use a good quality forged spanner when tightening the collet nut rather than softer pressed steel spanners, which can deform.
IDo not use over long spanners and over tightening could occur.
     

Side Fence & Fence Rods

Side Fence & Fence Rods
  All Trend routers are supplied with a side-fence, which is used to guide the router parallel to the edge of the work. Some less expensive routers are not supplied with a side fence, and do not have universal fittings to allow one to be attached. The Trend T4E and T5E use 8mm rods with 84mm centres. The T10E uses 10mm rods and 100mm centres and the T11E has 10mm rods at 110mm centres.
Side Fence & Fence Rods
  The side fence body slides on the rods to position the router from the edge guide. The rods are locked in position with the thumbscrews. The Trend T5E, T10 and T11 routers also have a micro adjuster incorporated into the fence to allow for fine adjustment when positioning the cutter on the work.
Side Fence & Fence Rods
  Extra long 500mm long rods are available in both 8mm and 10mm sizes, to increase side fence reach.
     

Threaded Mounting Points

Threaded Mounting Points
  A number of routers have the facility to bolt on sub-bases, however these may need to be specially drilled. These fixing points can also be used for mounting the router onto jigs and router tables. All Trend routers use the TBC (Trend Base Configuration), which provide a common format fixing point for routing jigs and tables. The TBC standard logo appears on the applicable Trend product packaging.
Threaded Mounting Points
  By choosing a router with a TBC base there is no issue with compatibility with the wide selection of Trend routing jigs and accessories.
     

Router Base and Slider

Router Base and Slider
  The underside of the base plate of most routers is faced with a plastic material to allow the router to glide easily on the work without marking its surface. This is generally fixed with adhesive, but some are fixed with screws only, and can be replaced when worn. The slider plates are made from laminate or from moulded plastic. Laminate sliders are preferred as they have a flatter tolerance and harder wearing surface.
Some router base plates also have centre line mark cast into the edge, which allows the router to be centred easily for grooving or plunge drilling.
Router Base and Slider
  It is advisable to select a router that has at least one flat on the base so that it can easily be guided by a batten or clamp guide.
     

Guide Bush Mounting Points

Guide Bush Mounting Points
  Template guide bushes can be fitted to most routers and are used to guide the cutter when using a template or jig. The Trend T10 and T11 routers have adjustable centring plates, which enable the guide bush to be centred on the router spindle using a line-up pin that is fitted into the collet. This line up pin is then used to centre the 30mm guide bush.
Guide Bush Mounting Points
  Trend use the Euro style of guide bush and have the largest selection of guide bushes available with sizes ranging from 7.74mm to 40mm in diameter. Euro style guide bushes will fit a wide range of different makes of router directly that have a 60mm recess. There are even larger guide bushes available for the Trend T11E up to 70mm diameter.
Guide Bush Mounting Points
  Alternatively a circular sub-base Trend ref UNIBASE can be fitted to a router to accept the guide bushes. This sub-base includes a line up bush and pin to ensure guide bush to cutter accuracy.
     

Dust Extraction Spout

Dust Extraction Spout
  Most routers are supplied with a removable dust spout, which helps deflect the dust and chips away from the operator and to extract them via a vacuum extractor. Some dust spouts are bolted into the router base, whereas others such as the Trend T5E have a clip-in spout. It is advisable to select routers with common outlet dust spout sizes for convenience.
Dust Extraction Spout
  Trend T5E has a clip-in spout for ease of removal.
     

Spare Parts and Repairs

Spare Parts and Repairs
  Another consideration when choosing a router is what is the warranty period, and the after-sales support available. Trend professional tools have a 3-year warranty, plus Trend offer a full range of spares from stock. Furthermore spare parts drawings and wiring diagrams and full instruction manuals are all available as downloads from the website. The Trend website also includes links to a wide range of online product videos. Trend prides itself on excellent customer service, technical support and availability of spares and accessories. There is also an online technical support service on their website too.
Spare Parts and Repairs
  Trend Professional tools have a 3-year warranty available.
     

Choosing your Router

Choosing your Router
  When looking to buy a router, you will notice huge differences in the type and positioning of switches, plunge locks, depth gauges etc, all factors that determine the ease of handling of the router and which may affect your specific application.
So before you finally commit yourself, do try and find the opportunity to actually try out as many different models as possible.

Choosing your Router
  This is much easier these days, as many tool dealers and manufacturers host open days and shows, or offer specialist tuition courses where you can gain real ‘hands on’ experience.
     
RELATED PRODUCTS
1000W 1/4" Variable Speed Router 115V - UK sale only
1000W 1/4" Variable Speed Router 115V - UK sale only
T5ELB
£ 199.00 +VAT
2000W 1/2" Variable Speed Router 230V - UK sale only
2000W 1/2" Variable Speed Router 230V - UK sale only
T10EK
£ 357.41 +VAT
Trend T11 110volt 1/2in collet Router - powerful 2000 watt motor and user friendly adjustments for high end performance in hand
Trend T11 110volt 1/2in collet Router - powerful 2000 watt motor and user friendly adjustments for high end performance in hand
T11ELK
£ 411.63 +VAT
 
< Back to Index Previous   Previous   |  Next   Next
https://uk.trustpilot.com/review/trend-uk.com [^]
 
  Aspin Interactive e-commerce