DEALER LOGIN
Trend
Login  |  Register
Items 0  |   View order

What products do I need to cut a worktop joint?

What products do I need to cut a worktop joint?
  Q. What products do I need to rout a worktop joint?

A. There a number of products that are required for accurate worktop joint routing these are (1) 1/2 inch plunge router with 30mm guide bush eg T10EK, (2) worktop jig eg COMBI1002, (3) a 1/2 inch diameter x 50mm cut TCT worktop cutter eg C153DX1/2TC, (4) biscuit jointer cutter eg C152X1/2TC, (5) No. 20 biscuits eg ref BSC/20/100, (6) worktop connector bolts eg PC/10/M and (7) two clamps eg FC/200 (1 off).
     
RELATED PRODUCTS
kitchen worktop jigs
F clamp 200mm x 100mm
F clamp 200mm x 100mm
FC/200
£ 16.03 +VAT
Two flute cutter 12.7mm diameter
Two flute cutter 12.7mm diameter
C153DX1/2TC
£ 28.58 +VAT
Biscuit jointer set
Biscuit jointer set
C152X1/2TC
£ 41.69 +VAT
Trend No 20 Size Compressed Beech Biscuits - 100 Pack
Trend No 20 Size Compressed Beech Biscuits - 100 Pack
BSC/20/100
£ 7.81 +VAT
Panel butt connectors
Panel butt connectors
PC/10/M
£ 10.48 +VAT
 
RELATED VIDEOS
Bearing Guided Cutter Video
Bearing Guided Cutter Video
Worktop Jig Video
Worktop Jig Video
 
RELATED TEST REVIEWS
Edge Jointing Test
Edge Jointing Test
 
RELATED INSTRUCTIONS
EN847 Standard Router Cutter Instructions
EN847 Standard Router Cutter Instructions
C152 Biscuit Jointer Instructions
C152 Biscuit Jointer Instructions
 
RELATED DOWNLOADS
Power Tool Safety Sheet EN60745-1
Power Tool Safety Sheet EN60745-1
Cutting Tools & Routing Safety Sheet
Cutting Tools & Routing Safety Sheet
 
< Back to Index Previous   Previous   |  Next   Next
https://uk.trustpilot.com/review/trend-uk.com [^]
 
  Aspin Interactive e-commerce