||Q. I have a Dewalt DW625 1/2 inch shank router and want to fit a 900mm wide worktop joint, what else do I need to rout a worktop joint?
A. The items required for worktop routing are a 30mm guide bush (ref. GB30/A), universal sub base to fit the bush to router (ref. UNIBASE), worktop jig (ref. COMBI1002 or KWJ900), two clamps (ref. FC/200 for 1 off), a 1/2 inch diameter x 50mm cut length TCT worktop cutter, plus we advise a biscuit jointer cutter, panel connecting bolts and flat biscuits to strengthen the joint, these additional items are available as a pack ref. CR/KFP/3. A carry case is also recommended ref. CASE/1001.