DEALER LOGIN
Trend
Login  |  Register
Items 0  |   View order

Finishing Off

Finishing Off
  11. Any feather-edges should be removed and the patches checked for fit in the pockets.

The patches were then glued in place. Since thin timber can curl when glue is applied to one side, the patches may need to be held in place with a clamp arrangement until the glue has set.

If the patches are being fitted flush, any discrepancy in material surfaces after the glue has dried should be planed or scraped rather than sanded. This prevents apposing coloured dust from contaminating the contrasting timber during sanding.

A couple of coats of clear wood sealer/lacquer were applied to the work-piece.

Finishing Off
  12. The finished project, which show the inlays fitted to the side of a toy box.

Written by Derek Greig - Technical Advisor at Trend Machinery & Cutting Tools Ltd.

Finishing Off
 
     
RELATED PRODUCTS
Inlay kit with 3.2mm cutter 1/4 Solid tungsten
Inlay kit with 3.2mm cutter 1/4 Solid tungsten
INLAY/KIT/A
£ 26.33 +VAT
 
RELATED TEST REVIEWS
Templates Test Review Test
Templates Test Review Test
 
RELATED INSTRUCTIONS
TEMP/IN Inlay Template Instructions
TEMP/IN Inlay Template Instructions
INLAY/KIT Router Inlay Kit Instructions
INLAY/KIT Router Inlay Kit Instructions
 
RELATED DOWNLOADS
Cutting Tools & Routing Safety Sheet
Cutting Tools & Routing Safety Sheet
 
< Back to Index Previous   Previous    
https://uk.trustpilot.com/review/trend-uk.com [^]
 
  Aspin Interactive e-commerce