DEALER LOGIN

Items 0 | View order

KNOWLEDGE BASE

In depth information on a wide range of topics.


		Routing - Getting Started



		How to Guides



		Router & Cutter Maintenance



		Routing Accessories



		Tradesman Routing Applications



		Routing Cutter Applications



		Routing Jigs & Templates



		Table Routing



		Frequently Asked Questions



		Drilling & Trend Snappy



		Sharpening with Diamond Stones



		Sawing



		Spindle Tooling



		Timbers & Material Glossary

Routing - Getting Started

Routing Introduction

All you need to know when getting started with routing.

Router Cutter Ranges

Explains the differences between our router cutter ranges shown.

Find the perfect Router for your project

Our guide to help you choose the perfect router and make the best router choice.

Cutter Type Selection

Choosing different types of cutters for different applications.

How to setup your Router ready for use.

How to correctly fit cutters, make cuts and setting the correct speed.

Routing Basics Explained

A helpful guide to the basics of using a router.

Cutter Style Selection

A guide to selecting correct cutters for a wide range of routing applications.

Basic Cutter and Collet Maintenance

It is essential to regularly maintain your cutters and collets in order to...

Health and Safety considerations when Routing

Following basic safety instructions will ensure yours & others health & safety.

Routing Hints and Tips

A selection of useful tips and suggestions when routing.

How to setup your Router ready for use.

		Fitting Cutters Fitting cutters Always take extreme caution when removing the protective wax from a new cutter. Do not pull it off as the sharp cutting edges...


		Setting Depth Of Cut Setting Depth of Cut A guide to the optimum Plunge depth that can be cut in a single pass is that the depth of cut should not exceed either...


		Direction Of Cut Direction of Cut Of all the queries that the Trend technical support receive during the course of the year, the most common relate to confusion...


		Progressive Cuts Progressive cuts When using large moulding or panelling cutters, the full depth of cut must be reached in a series of shallow steps. Where...


		Router Speed Router Speed With the advent of electronic speed control the question of choosing the correct router speed arises. Recommended router speeds...


		Feed Speed Feed Speed To minimise wear on the router motor bearings, prevent cutter damage and improve the finish left on the cut face, it is important to...


US - United States - UK - Unknown Browser - Unknown OS Platform	https://uk.trustpilot.com/review/trend-uk.com [^]
	https://uk.trustpilot.com/review/trend-uk.com [^]

KNOWLEDGE BASE

Routing - Getting Started

How to Guides

Router & Cutter Maintenance

Routing Accessories

Tradesman Routing Applications

Routing Cutter Applications

Routing Jigs & Templates

Table Routing

Frequently Asked Questions

Drilling & Trend Snappy

Sharpening with Diamond Stones

Sawing

Spindle Tooling

Timbers & Material Glossary

Routing - Getting Started

How to setup your Router ready for use.

Company

Website

Support

Stay in touch

Contact Us

+44 (0)1923 249911

Email