Group

Voting on our T18S Competition closes at midnight tonight - Have you voted yet? 

Voting on our T18S Competition closes at midnight tonight - Have you voted yet? 


Frequently Asked Questions

Sawblade FAQs

Frequently Asked Questions about Sawblades

We sell a whole range of bushing washers to suit all bore sizes, fit the bushing washer into the bore of the sawblade.

... Read more

Depends on the diameter and bore size but one of the blades from the Aluminium and Plastic section (triple chip tooth grind) will cut the material.

... Read more

No. Our sawblades/cutters are not suitable for this type of material.

... Read more

No. We have a range that are suitable for use on non-ferrous metals (metals without iron content).

... Read more

Yes, the BJB/100S or CR/BJB100 are the equivilent Trend blades.

... Read more

We would recommend our AP triple chip blades for cutting Corian it has a -5 degree tooth rake and is ideal for this material although longevity of the blade is reduced due to the abrasive nature of the material.

... Read more

Depends on the diameter and bore size but one of the blades from the Aluminium and Plastic section (triple chip tooth grind) will cut the material.

... Read more

The Combination blades will cut Plasterboard and Stone fibre board.

... Read more

Depending on diameter and bore size but one of the blades the Aluminium and Plastic section will cut the material with some PTFE spray (TRENDICOTE) as a Lubricant.

... Read more

Araldite two part formula.

... Read more

When the flats of a sawblade’s teeth are angled negatively unlike a conventional positive hook shape.

... Read more

Yes. A blade with a negative hook needs to be used to minimise ‘pick up’ and ‘snatching’.

... Read more