We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
LOCK/JIG - Trend Lock Jig
LOCK/JIG
Contractor jig with interchangeable templates for use with a plunge router to cut the mortise & face-plate recess for popular door locks.
- For most common sash mortises & dead locks, with up to 3 inch deep mortises & a 7/8 inch or 1 inch face-plate.
- Deeper mortises can be achieved with a suitable size of auger bit.
- Fast, clean & accurate results on doors 34mm to 58mm thick, even in hardwood.
- Steel plates & body.
- An auger bit and drill is required to complete deep mortises.
- The jig requires a 1/2- inch plunge router with a 80mm plunge, fitted with a 30mm guide bush with 6mm spigot & 12mm diameter long reach cutter. A 1/4-inch plunge router can be used for the face plate but will not achieve full depth of mortise.
Contractor Lock Jig
A site-tough routing jig with interchangeable templates to cut lock & face-plate recesses in timber doors. Steel construction and tool-free setup deliver speed and accuracy. Ideal for all popular mortice sash locks, dead locks and latches.
Key Applications
B
U
C
Features
Steel Construction for maximum strength, durability and accuracy.
Full-Length Fence secured with three locking levers adjusts the jig quickly and securely for all doors between 34mm and 58mm thick.
Thumb-Turn Quick-Release Clamps with non-marring pads, secure the jig quickly and easily.
17 Interchangeable Templates to fit all common lock case (5 templates) and face plates (12 templates).
Centering Insert ensures jig is perfectly positioned on any door
Guide Bush Collar converts the GB160 to a 30mm Guide Bush, minimising setup time.
Reference Chart provides quick reference between templates and lock sizes
2mm Height Spacers can be adjusted to accommodate different guide bush spigots.
Requires a router (½”/12mm collet with 80mm plunge), cutter (½”/12mm shank x 12mm cut diameter x 63mm cut length) and guide bush (30mm diameter x 6mm spigot).
Details
-
Steel Construction for maximum strength, durability and accuracy.
-
Full-Length Fence secured with three locking levers adjusts the jig quickly and securely for all doors between 34mm and 58mm thick.
-
Thumb-Turn Quick-Release Clamps with non-marring pads, secure the jig quickly and easily.
-
16 Interchangeable Templates to fit all common lock case (4 templates) and face plates (12 templates).
-
Centering Insert ensures jig is perfectly positioned on any door
-
Guide Bush Collar converts the GB160 (supplied with Trend Hinge Jigs) to a 30mm Guide Bush, minimising setup time.
-
Reference Chart provides quick reference between templates and lock sizes
-
2mm Height Spacers can be adjusted to accommodate different guide bush spigots.
-
Requires: router (½”/12mm collet with 80mm plunge), cutter (½”/12mm shank x 12mm cut diameter x 63mm cut length) and guide bush (30mm diameter x 6mm spigot).
Featured Products
LOCK/JIG
Contractor Lock Jig
A site-tough routing jig with interchangeable templates to cut lock & face-plate recesses in timber doors. Steel construction and tool-free setup deliver speed and accuracy. Ideal for all popular mortice sash locks, dead locks and latches.
Related Products
Discover more about Trend Door Hanging Solutions
Explore the Skeleton Hinge Jig
Door Hanging Products
Door Hanging Videos
- Door thickness min.
- 34 mm
- Door thickness max.
- 58 mm
- Template outer size
- 234.3 x 59.8 x1.5mm
Lock faceplate sizes
- Metric D x OL (Imperial D x OL approx.).
- Template
- 22.2x156 mm (7/8"x 6 1/8")
- 1
- 22.5x152.5 mm (7/8"x 6")
- 2
- 25.4x121 mm (1"x 4 3/4")
- 3
- 25.4x127.5 mm (1"x 5")
- 4
- 25.4x133.5 mm (1"x 5 1/4")
- 5
- 25.4x145 mm (1"x 5 3/4")
- 6
- 25.4x153 mm (1"x 6")
- 7
- 25.4x156.5 mm (1"x 6")
- 8
- 25.4x165.5 mm (1"x 6 1/2")
- 9
- 25.4x177 mm (1"x 7")
- 10
- 25x57.5 mm (1"x 2 1/4")
- 11 UPPER
- 26x56.5 mm (1"x 2 1/4")
- 11 LOWER
- 25.6x162mm (1"x 6 3/8")
- 12
Lock mortise sizes
- Metric D x OL (Imperial D x OL)
- Template
- 16x72 mm* (5/8" x 2 7/8")
- A
- 16x107 mm* (5/8" x 4 1/4")
- B
- 19x78 mm* (3/4" x 3 1/8")
- C
- 19x109 mm* (3/4" x 4 1/4")
- D
24 mm x 24 mm (2 x circle)
*These are maximum mortise lock case (body) lengths, unless radius ends are squared with a chisel. Actual length of mortise is 7mm longer.
| Product Image | Product Ref | Diagram No | Description | Quantity Required | Price for 1 |
|---|---|---|---|---|---|
|
WP-LOCK/T/1 | 013 | Replacement face plate template 1 for the LOCK/JIG. |
1 | £10.18 |
|
WP-LOCK/T/10 | 013 | Replacement face plate template 10 for the LOCK/JIG. |
1 | £10.18 |
|
WP-LOCK/T/11 | 013 | Replacement latch template for the LOCK/JIG.
|
1 | £10.18 |
|
WP-LOCK/T/2 | 013 | Replacement face plate template 2 for the LOCK/JIG. |
1 | £12.62 |
|
WP-LOCK/T/201 | 013 | Accessory template for the LOCK/JIG. |
1 | £20.47 |
|
WP-LOCK/T/3 | 013 | Replacement face plate template 3 for the LOCK/JIG. |
1 | £10.18 |
|
WP-LOCK/T/4 | 013 | Replacement face plate template 4 for the LOCK/JIG. |
1 | £10.18 |
|
WP-LOCK/T/5 | 013 | Replacement face plate template 5 for the LOCK/JIG. |
1 | £10.18 |
|
WP-LOCK/T/6 | 013 | Replacement face plate template 6 for the LOCK/JIG. |
1 | £10.18 |
|
WP-LOCK/T/7 | 013 | Replacement face plate template 7 for the LOCK/JIG. |
1 | £10.18 |
|
WP-LOCK/T/8 | 013 | Replacement face plate template 8 for the LOCK/JIG. |
1 | £10.18 |
|
WP-LOCK/T/9 | 013 | Replacement face plate template 9 for the LOCK/JIG. |
1 | £12.62 |
|
WP-LOCK/T/A | 012 | Replacement mortise template A for the LOCK/JIG. |
1 | £10.18 |
|
WP-LOCK/T/B | 012 | Replacement mortise template B for the LOCK/JIG. |
1 | £10.18 |
|
WP-LOCK/T/C | 012 | Replacement mortise template C for the LOCK/JIG. |
1 | £10.18 |
|
WP-LOCK/T/D | 012 | Replacement mortise template D for the LOCK/JIG. |
1 | £10.18 |
Videos
Lock Jig Video
Using the Lockjig to rout a door lock.
Lock Jig Short Video
Video short of the Lock Jig
Tibby Singh Trend Lock Jig Demo Video
Tibby Singh Demonstrates the Trend Lock Jig - D&M Show 2015.
Instructions
Spares Diagrams
Product Questions
The standard radius produced with our lock jig is 6mm this is the radius from a 12mm diameter cutter. A 10mm radius can be obtained with a 20mm cutter C030A in conjunction with a GB240 24mm guide bush.
The fingers on the Lock Jig allow the jig to be lifted off the door edge by up to 6mm. This prevents the guide bush from catching the door.
The GB30A should not be used on thin internal doors as the guide bush can contact the jig body. We advise GB30 with 6mm spigot length is used.
Yes and no because although the mortise could be recessed the faceplate would require some work with a chisel to finish it off. Also special sizes of plate may be required.
No you can use the collar that comes included with the Lock Jig. This fits over the top of the GB160, which will then increase the diameter to 30mm.
Yes, there is an insert that is placed in the jig which reduces the aperture length.
Yes we have a wide selection of other sizes available. Please call our technical department with your lock dimensions.
Yes, available from stock, the part number is WP-LOCK/T/14.
For the small latches used on cupboard doors, the two different sizes are to accommodate metric or imperial sizes.
You can cut out the remainder of the depth by using a auger bit.
Write Your Own Question
May also need
-
C172X1/2TC£33.68