TEMP/PD/R/F - Template panel door set rad 372mm


Clear plastic 6mm template for use with a router and template profiling cutter to create a curved rail and panelled door.

  • Two part templates for both the concave and convex cut, for the frame and panel.
  • A Unibase may be required for certain makes and models of router.
470 mm
398 mm
102 mm
372 mm
Door width possible
565 to 600 mm
Product Image Product Ref Diagram No Description Quantity Required Price for 1
UNIBASE - Trend UNIBASE - Router base adaptor. Allows other makes and models of router to use the Trend Guide Bushes for increased diversity. UNIBASE

The Unibase enables routers with non-standard guide bush fittings to accept the range of Trend guide bushes. It will fit directly to most routers.

  • Line-up pin used with a 16mm plastic bush to ensure concentricity of the cutter to the guide bush when fitting the sub-base.
  • Suits collet sizes 1/4 inch, 8mm, 12mm and 1/2 inch.
  • Instructions for fitting
  • The line-up pin fit into the collet and is plunged through the router base. The line-up bush is fitted into the Unibase and secured. This is then placed over the line-up pin and rotated in order to line up the fixing holes. The Unibase screws are tightened and then the line-up bush can be replaced with any choice of Trend guide bushes. These range from 10mm up to 30mm (GB10 - GB32). For larger diameter cutters a 40mm guide bush (GB40) is available.
  • Ideal for hinge jig and lock jig

Product Questions

Write Your Own Question
Your Question: