2/0X1/4TC - Single flute cutter 1mm diameter
2/0X1/4TC
Eccentric single flute cutters.
- Cutters are chosen for fast free cutting, when cutting speed takes preference over finish.
- Cutters with prefix S are Solid Carbide.
- Cutters of 2.0mm diameter and below should have a maximum of 1.0mm depth of cut per pass.
- Small diameter tools must be handled with care to avoid breakage.
- Single flute cutters should not be used in eccentric chucks.
- D1
- 1 mm
- C
- 3 mm
- OL
- 49 mm
- Shank Diameter
- 1/4 inch
no spare products
Videos
Straight Router Cutters Video
Our video guide to using straight router cutters which highlights the different types, grades and applications.
