46/18X1/2TC - Bearing guided ovolo cutter 25.4mm radius

Name: 46/18X1/2TC - Bearing guided ovolo cutter 25.4mm radius
SKU: 46/18X1/2TC
Price: 166.2 GBP
Availability: InStock

46/18X1/2TC

£166.20

£138.50

Self-guiding cutters for rounding over edges do not require a side fence.

They are supplied with two bearings.
Use the larger bearing for a round-over.
If the cutter is lowered, a top quirk can be produced.
A full round/bullnose for stair treads can also be produced by taking a second pass from the opposite side of the workpiece.

For stationary machines at max. recommended speed 16,000 RPM

Product Image

Product Ref

Diagram No

Description

Quantity Required

Price for 1

Trend Router Cutter Bearing - for 3/16in bottom mounting

High quality ball bearing for free running against an edge to prevent heat build up.
3/16in inside diameter for use on bottom mounted trimmer and profiling cutters.
1/2in outside diameter for matched fit to trimming and templating cutters.
Bearings are grease packed for maximum efficiency and lifespan.
Shielding to both sides of the bearing prevents penetration of dust for maximum performance.

£6.76

Bearings are shielded to prevent penetration of dust and grease packed for life.

They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure.
Scrape off any resin build-up.
Always check the tightness of the fixing screw before using cutter.

£8.47