B300 - Bearing 30mm diameter 1/4" bore
B300
Bearings are shielded to prevent penetration of dust and grease packed for life.
- They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure.
- Scrape off any resin build-up.
- Always check the tightness of the fixing screw before using cutter.
- OD
- 30 mm
- ID
- 1/4 inch
- ID
- 6.35 mm
- Thickness
- 9/32 inch
no spare products
Videos
Bearing Guided Cutter Video
Our video guide on how to use your bearing guided cutters, the different types and applications.
Safety Sheets
May also need
-
33/60X1/4£22.31