C075X1/4TC - Rounding over 4.8mm radius x 12.7mm cut

Name: C075X1/4TC - Rounding over 4.8mm radius x 12.7mm cut
SKU: C075X1/4TC
Price: 47.88 GBP
Availability: InStock

C075X1/4TC

£47.88

£39.90

Trend Craft Pro 1/4in shank bearing guided round over router cutter - 3/16in radius Two Flute Carbide tips.

Bearing guided classic round over detail for edge detailing on curved and straight work with additional bearing for quirked Ovolo detail option.
Two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber based materials.
3/16in radius for matched imperial replication work, ideal for lighter roundover, Ovolo or bullnosing detail work on smaller furniture work.
PTFE coating to minimise heat and resin build up for increased cutter performance and longevity.
1/4in shank for easy control in smaller routers with 'K'mark shank to ensure safe working practices.

Product Image

Product Ref

Diagram No

Description

Quantity Required

Price for 1

Trend Router Cutter Bearing - for 3/16in bottom mounting

High quality ball bearing for free running against an edge to prevent heat build up.
3/16in inside diameter for use on bottom mounted trimmer and profiling cutters.
1/2in outside diameter for matched fit to trimming and templating cutters.
Bearings are grease packed for maximum efficiency and lifespan.
Shielding to both sides of the bearing prevents penetration of dust for maximum performance.

£6.76

Bearings are shielded to prevent penetration of dust and grease packed for life.

They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure.
Scrape off any resin build-up.
Always check the tightness of the fixing screw before using cutter.

£8.47