Group

Voting on our T18S Competition closes at midnight tonight - Have you voted yet? 

Voting on our T18S Competition closes at midnight tonight - Have you voted yet? 


C094X1/4TC - Ovolo 4mm radius

C094X1/4TC
£57.18
£47.65

This double ribbed ovolo style is an alternative to the rounding over cutter. If the cutter is lowered, a top quirk can be produced.

    D
    28.7 mm
    C
    1/2 inch
    C
    12.7 mm
    B
    9.5 mm
    B2
    12.7 mm
    R
    4 mm
    R2
    4 mm
    OL
    64 mm
    Shank Diameter
    1/4 inch
    Product Image Product Ref Diagram No Description Quantity Required Price for 1
    B127A - Bearing 1/2" diameter 3/16" bore B127A

    Trend Router Cutter Bearing - for 3/16in bottom mounting

    • High quality ball bearing for free running against an edge to prevent heat build up.
    • 3/16in inside diameter for use on bottom mounted trimmer and profiling cutters.
    • 1/2in outside diameter for matched fit to trimming and templating cutters.
    • Bearings are grease packed for maximum efficiency and lifespan.
    • Shielding to both sides of the bearing prevents penetration of dust for maximum performance.
    £6.56
    B95A - Bearing 3/8" diameter 3/16" bore B95A

    Bearings are shielded to prevent penetration of dust and grease packed for life.

    • They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure.
    • Scrape off any resin build-up.
    • Always check the tightness of the fixing screw before using cutter.
    £8.22

    Videos

    Bearing Guided Cutter Video

    Our video guide on how to use your bearing guided cutters, the different types and applications.

    Product Questions

    Write Your Own Question
    Your Question: