C152X12MMTC - Biscuit jointer set

Name: C152X12MMTC - Biscuit jointer set
SKU: C152X12MMTC
Price: 63.44 GBP
Availability: InStock

C152X12MMTC

£63.44

£52.87

This two wing self-guiding Tungsten Carbide Tipped slotting cutter is ideal for biscuit jointing.

The set is supplied with three ball bearing guides to suit the three sizes of biscuits available.
A slightly longer cut than the length of the biscuit is required for ease of alignment during assembly.

Product Ref	Diagram No	Description	Quantity Required	Price for 1
B127A	002	Trend Router Cutter Bearing - for 3/16in bottom mounting High quality ball bearing for free running against an edge to prevent heat build up. 3/16in inside diameter for use on bottom mounted trimmer and profiling cutters. 1/2in outside diameter for matched fit to trimming and templating cutters. Bearings are grease packed for maximum efficiency and lifespan. Shielding to both sides of the bearing prevents penetration of dust for maximum performance.	1	£6.56
B16A	002	Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up. Always check the tightness of the fixing screw before using cutter.	1	£8.40
B19A	002	Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up. Always check the tightness of the fixing screw before using cutter.	1	£10.59
SP-J	003	Spare part packs make ordering spares easier. Packs include, hex key (if required), screw, washer and shield (if required).	1	£2.68